TPU-Ether Texin® 950 Covestro - Polycarbonates
So sánhBảng thông số kỹ thuật
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| elongation | elongation Break | ASTMD412 | 470 % |
| tear strength | tear strength --2 | ASTM D624 | 131 kN/m |
| tear strength | tear strength -- | ISO 34-1 | 130 kN/m |
| Permanent compression deformation | Permanent compression deformation 23°C,22hr | ASTMD395B | 20 % |
| Permanent compression deformation | Permanent compression deformation 23°C,22hr3 | ASTMD395B | 15 % |
| Permanent compression deformation | Permanent compression deformation 70°C,22hr | ASTMD395B | 70 % |
| Permanent compression deformation | Permanent compression deformation 70°C,22hr3 | ASTMD395B | 40 % |
| Shore hardness | Shore hardness | ASTM D2632 | 35 % |
| tensile strength | tensile strength 50%Strain | ASTMD412 | 12.1 MPa |
| tensile strength | tensile strength 100%Strain | ASTMD412 | 13.8 MPa |
| tensile strength | tensile strength 300%Strain | ASTMD412 | 27.6 MPa |
| tensile strength | tensile strength Yield | ASTMD412 | 49.0 MPa |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Bending modulus | Bending modulus 23°C | ASTMD790 | 114 MPa |
| Bending modulus | Bending modulus 70°C | ASTMD790 | 46.9 MPa |
| Taber abraser | Taber abraser 1000Cycles,1000g,H-18Wheel | ASTM D1044 | 75.0 mg |
| Taber abraser | Taber abraser 1000Cycles,1000g,H-18Wheel | ISO 4649 | 75.0 mg |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Brittle temperature | Brittle temperature | ASTMD746 | <-68.0 °C |
| Glass transition temperature | Glass transition temperature | DMA | -27.0 °C |
| Vicat softening temperature | Vicat softening temperature | ISO 306/50 | 128 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD | ASTM D696 | 1.3E-04 cm/cm/°C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Shrinkage rate | Shrinkage rate MD:2.54mm | ASTM D955 | 0.80 % |
| Shrinkage rate | Shrinkage rate TD:2.54mm | ASTM D955 | 0.80 % |
| Shrinkage rate | Shrinkage rate TD:2.54mm | ISO 2577 | 0.80 % |
| Shrinkage rate | Shrinkage rate MD:2.54mm | ISO 2577 | 0.80 % |
| density | density | ASTMD792 | 1.15 g/cm³ |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Shore hardness | Shore hardness ShoreD | ASTMD2240 | 50 |
| aging | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,70hr,在ASTM#3油中 | ISO 175 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,70hr,在ASTM#3油中 | ISO 175 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,在ASTM#3油中 | ISO 175 | 12 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,168hr,在ASTM#3油中 | ISO 175 | -7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,504hr,在ASTM#3油中 | ASTM D471 | 1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,504hr,在ASTM#3油中 | ASTM D471 | -9.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,504hr,在ASTM#3油中 | ASTM D471 | -18 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,70hr,inReferenceFuelC | ISO 175 | -17 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,70hr,inReferenceFuelC | ISO 175 | -42 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,70hr,inReferenceFuelC | ISO 175 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr | ASTMD573 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,168hr | ASTM D573 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,168hr | ASTM D573 | -1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,336hr | ASTMD573 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,504hr,在基准燃料A中 | ASTM D471 | 13 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,504hr,在基准燃料A中 | ASTM D471 | -4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,504hr,在基准燃料A中 | ASTM D471 | -4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,70hr,在ASTM#1油中 | ASTMD471 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,70hr,在ASTM#1油中 | ASTMD471 | 7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,70hr,在ASTM#1油中 | ASTMD471 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,70hr,在ASTM#3油中 | ASTM D471 | 10 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,70hr,在ASTM#3油中 | ASTM D471 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,70hr,在参考燃料A中（异辛烷） | ISO 175 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,70hr,在参考燃料A中（异辛烷） | ISO 175 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inReferenceFuelC | ISO 175 | -17 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,168hr,inReferenceFuelC | ISO 175 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,168hr,inReferenceFuelC | ISO 175 | -30 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,在参考燃料A中（异辛烷） | ISO 175 | 16 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,168hr,在参考燃料A中（异辛烷） | ISO 175 | 6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,168hr,在参考燃料A中（异辛烷） | ISO 175 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,336hr,inReferenceFuelC | ISO 175 | -20 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,168hr,在基准燃料A中 | ASTM D471 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,336hr,C级标准燃料 | ASTM D471 | -20 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,336hr,C级标准燃料 | ASTM D471 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,125°C,336hr | ASTM D573 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,125°C,336hr | ASTM D573 | -22 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,504hr | ASTMD573 | -44 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,125°C,504hr | ASTM D573 | -5.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,125°C,504hr | ASTM D573 | -25 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain100°C,70hr | ISO 216 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain100°C,70hr | ISO 216 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain100°C,168hr | ISO 216 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,336hr,在ASTM#3油中 | ASTM D471 | -9.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,504hr,在ASTM#1油中 | ASTMD471 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,504hr,在ASTM#1油中 | ASTMD471 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,504hr,在ASTM#1油中 | ASTMD471 | -7.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,168hr,inReferenceFuelC | ASTMD471 | -13 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,168hr,在基准燃料A中 | ASTM D471 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,336hr,inReferenceFuelC | ASTMD471 | -10 |
| Volume change | Volume change 100°C,504hr,在ASTM#1油中 | ISO 175 | 0.0 % |
| Volume change | Volume change 23°C,70hr,C级标准燃料 | ASTM D471 | 22 % |
| Volume change | Volume change 23°C,168hr,A级标准燃料 | ASTM D471 | 1.0 % |
| Volume change | Volume change 23°C,168hr,C级标准燃料 | ASTM D471 | 26 % |
| Volume change | Volume change 23°C,336hr,A级标准燃料 | ASTM D471 | 1.0 % |
| Volume change | Volume change 23°C,336hr,在基准燃料C中 | ISO 175 | 26 % |
| Volume change | Volume change 23°C,504hr,在基准燃料A中 | ISO 175 | 1.0 % |
| Volume change | Volume change 23°C,504hr,在基准燃料C中 | ISO 175 | 26 % |
| Volume change | Volume change 100°C,70hr,在ASTM#3油中 | ISO 175 | 9.0 % |
| Volume change | Volume change 100°C,70hr,在ASTM#1油中 | ISO 175 | 0.0 % |
| Volume change | Volume change 100°C,168hr,在ASTM#3油中 | ISO 175 | 10 % |
| Volume change | Volume change 100°C,168hr,在ASTM#1油中 | ISO 175 | 0.0 % |
| Volume change | Volume change 100°C,336hr,在ASTM#3油中 | ISO 175 | 12 % |
| Volume change | Volume change 100°C,336hr,在ASTM#1油中 | ISO 175 | 0.0 % |
| Volume change | Volume change 100°C,504hr,在ASTM#3油中 | ISO 175 | 13 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,504hr,在ASTM#3油中 | ASTM D471 | -2.0 |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,504hr,C级标准燃料 | ASTM D471 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,504hr,C级标准燃料 | ASTM D471 | -51 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain100°C,168hr | ISO 216 | -1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain100°C,336hr | ISO 216 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain100°C,336hr | ISO 216 | -2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain100°C,504hr | ISO 216 | 5.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain100°C,504hr | ISO 216 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain125°C,70hr | ISO 216 | 1.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,70hr | ASTMD573 | 10 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr | ASTMD573 | 15 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,336hr | ASTMD573 | 19 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,504hr | ASTMD573 | 16 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,70hr | ASTMD573 | 22 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,168hr | ASTMD573 | 29 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,336hr | ASTMD573 | 12 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,70hr,C级标准燃料 | ASTM D471 | -42 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,70hr,C级标准燃料 | ASTM D471 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,70hr,在基准燃料A中 | ASTM D471 | 16 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,70hr,在基准燃料A中 | ASTM D471 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,168hr,在ASTM#3油中 | ASTM D471 | -11 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,336hr,在ASTM#1油中 | ASTMD471 | -2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,336hr,在ASTM#1油中 | ASTMD471 | 8.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,336hr,在ASTM#1油中 | ASTMD471 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,336hr,在ASTM#3油中 | ASTM D471 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,336hr,在ASTM#3油中 | ASTM D471 | -2.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,504hr | ASTMD573 | 9.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,70hr | ASTMD573 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,168hr | ASTMD573 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,336hr | ASTMD573 | -2.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,504hr | ASTMD573 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,125°C,70hr | ASTMD573 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,504hr,在ASTM#1油中 | ASTMD471 | 2.0 |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,336hr,在ASTM#3油中 | ASTM D471 | 27 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,504hr,在ASTM#1油中 | ASTMD471 | 32 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,504hr,在ASTM#3油中 | ASTM D471 | 38 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,70hr,inReferenceFuelC | ISO 175 | 0.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,70hr,在参考燃料A中（异辛烷） | ISO 175 | 5.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inReferenceFuelC | ISO 175 | -6.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,在参考燃料A中（异辛烷） | ISO 175 | 7.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,在基准燃料A中 | ASTM D471 | 7.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,336hr,C级标准燃料 | ASTM D471 | -5.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,336hr,在基准燃料A中 | ASTM D471 | 3.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,70hr,inReferenceFuelC | ASTMD471 | -11 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,70hr,在基准燃料A中 | ASTM D471 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,70hr,在ASTM#3油中 | ISO 175 | 5.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,168hr,在ASTM#3油中 | ISO 175 | 5.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,336hr,在ASTM#3油中 | ISO 175 | -4.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,504hr,在ASTM#3油中 | ISO 175 | -2.0 |
| Volume change | Volume change 23°C,70hr,A级标准燃料 | ASTM D471 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,168hr,在ASTM#3油中 | ISO 175 | -11 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,336hr,在ASTM#3油中 | ISO 175 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,336hr,在ASTM#3油中 | ISO 175 | -2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,336hr,在ASTM#3油中 | ISO 175 | -9.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,504hr,在ASTM#3油中 | ISO 175 | 1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,504hr,在参考燃料A中（异辛烷） | ISO 175 | -4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,70hr,在ASTM#3油中 | ISO 175 | 10 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,70hr | ASTMD573 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,70hr | ASTM D573 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,70hr | ASTM D573 | 2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,70hr,在ASTM#3油中 | ASTM D471 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,在ASTM#1油中 | ASTMD471 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,504hr,inReferenceFuelC | ISO 175 | -15 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,504hr,inReferenceFuelC | ISO 175 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,504hr,inReferenceFuelC | ISO 175 | -51 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,504hr,在参考燃料A中（异辛烷） | ISO 175 | 13 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,504hr,在参考燃料A中（异辛烷） | ISO 175 | -4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,70hr,在参考燃料A中（异辛烷） | ISO 175 | 16 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,336hr,C级标准燃料 | ASTM D471 | -33 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,336hr,在基准燃料A中 | ASTM D471 | 7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,336hr,在基准燃料A中 | ASTM D471 | 1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,336hr,在基准燃料A中 | ASTM D471 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,504hr,C级标准燃料 | ASTM D471 | -15 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,125°C,168hr | ASTM D573 | -18 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,336hr | ASTMD573 | -40 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain125°C,336hr | ISO 216 | -22 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain125°C,504hr | ISO 216 | -5.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain125°C,504hr | ISO 216 | -25 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,168hr,在ASTM#1油中 | ASTMD471 | 4.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,336hr,在基准燃料A中 | ASTM D471 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,504hr,inReferenceFuelC | ASTMD471 | -13 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,504hr,在基准燃料A中 | ASTM D471 | 2.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,70hr,在ASTM#1油中 | ASTMD471 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,70hr,在ASTM#3油中 | ASTM D471 | 5.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,168hr,在ASTM#1油中 | ASTMD471 | 2.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,168hr,在ASTM#3油中 | ASTM D471 | 5.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,336hr,在ASTM#1油中 | ASTMD471 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,100°C,336hr,在ASTM#3油中 | ASTM D471 | -4.0 |
| Volume change | Volume change 23°C,336hr,在基准燃料A中 | ISO 175 | 1.0 % |
| Volume change | Volume change 23°C,336hr,C级标准燃料 | ASTM D471 | 26 % |
| Volume change | Volume change 23°C,504hr,A级标准燃料 | ASTM D471 | 1.0 % |
| Volume change | Volume change 23°C,504hr,C级标准燃料 | ASTM D471 | 26 % |
| Volume change | Volume change 100°C,70hr,ASTM标准油（1号） | ASTM D471 | 0.0 % |
| Volume change | Volume change 100°C,70hr,ASTM标准油（3号） | ASTM D471 | 9.0 % |
| Volume change | Volume change 100°C,168hr,ASTM标准油（1号） | ASTM D471 | 0.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,70hr,在基准燃料A中（异辛烷） | ISO 175 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,168hr,在基准燃料A中（异辛烷） | ISO 175 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,336hr,在基准燃料A中（异辛烷） | ISO 175 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,23°C,504hr,在基准燃料A中（异辛烷） | ISO 175 | 2.0 |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain125°C,70hr | ISO 216 | -7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain125°C,168hr | ISO 216 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain125°C,168hr | ISO 216 | -18 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain125°C,336hr | ISO 216 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,336hr | ASTM D573 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,336hr | ASTM D573 | -2.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,504hr | ASTMD573 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,504hr | ASTM D573 | 5.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,504hr | ASTM D573 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,70hr | ASTMD573 | -11 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,125°C,70hr | ASTM D573 | 1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,125°C,70hr | ASTM D573 | -7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,168hr | ASTMD573 | -27 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,125°C,168hr | ASTM D573 | 4.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,70hr,在基准燃料A中 | ASTM D471 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,C级标准燃料 | ASTM D471 | -17 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,168hr,C级标准燃料 | ASTM D471 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,168hr,C级标准燃料 | ASTM D471 | -30 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,在基准燃料A中 | ASTM D471 | 16 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,168hr,在基准燃料A中 | ASTM D471 | 6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,336hr,inReferenceFuelC | ISO 175 | -36 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,336hr,inReferenceFuelC | ISO 175 | -33 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,336hr,在参考燃料A中（异辛烷） | ISO 175 | 7.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,23°C,336hr,在参考燃料A中（异辛烷） | ISO 175 | 1.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,23°C,336hr,在参考燃料A中（异辛烷） | ISO 175 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,168hr,在ASTM#1油中 | ASTMD471 | 0.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,在ASTM#3油中 | ASTM D471 | 12 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,168hr,在ASTM#3油中 | ASTM D471 | -7.0 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,125°C,168hr | ASTMD573 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,125°C,336hr | ASTMD573 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air 支撐D,125°C,504hr | ASTMD573 | 1.0 |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,70hr,C级标准燃料 | ASTM D471 | -17 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,336hr,inReferenceFuelC | ISO 175 | -5.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,336hr,在参考燃料A中（异辛烷） | ISO 175 | 3.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,504hr,inReferenceFuelC | ISO 175 | -2.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,504hr,C级标准燃料 | ASTM D471 | -2.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,504hr,在基准燃料A中 | ASTM D471 | 8.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,70hr,在ASTM#1油中 | ASTMD471 | 18 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,70hr,在ASTM#3油中 | ASTM D471 | 17 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr,在ASTM#1油中 | ASTMD471 | 19 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr,在ASTM#3油中 | ASTM D471 | 25 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,336hr,在ASTM#1油中 | ASTMD471 | 23 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,504hr,在参考燃料A中（异辛烷） | ISO 175 | 8.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,70hr,在ASTM#3油中 | ISO 175 | 17 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr,在ASTM#3油中 | ISO 175 | 25 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,336hr,在ASTM#3油中 | ISO 175 | 27 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,504hr,在ASTM#3油中 | ISO 175 | 38 % |
| Volume change | Volume change 100°C,168hr,ASTM标准油（3号） | ASTM D471 | 10 % |
| Volume change | Volume change 100°C,336hr,ASTM标准油（1号） | ASTM D471 | 0.0 % |
| Volume change | Volume change 100°C,336hr,ASTM标准油（3号） | ASTM D471 | 12 % |
| Volume change | Volume change 100°C,504hr,ASTM标准油（1号） | ASTM D471 | 0.0 % |
| Volume change | Volume change 100°C,504hr,ASTM标准油（3号） | ASTM D471 | 13 % |
| Volume change | Volume change 23°C,70hr,在基准燃料A中 | ISO 175 | 0.0 % |
| Volume change | Volume change 23°C,70hr,在基准燃料C中 | ISO 175 | 22 % |
| Volume change | Volume change 23°C,168hr,在基准燃料A中 | ISO 175 | 1.0 % |
| Volume change | Volume change 23°C,168hr,在基准燃料C中 | ISO 175 | 26 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100%Strain,100°C,504hr,在ASTM#3油中 | ISO 175 | -9.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 300%Strain,100°C,504hr,在ASTM#3油中 | ISO 175 | -18 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,70hr,C级标准燃料 | ASTM D471 | 0.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,70hr,在基准燃料A中 | ASTM D471 | 5.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,C级标准燃料 | ASTM D471 | -6.0 % |
| Supplementary Information | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| CompressiveLoad | CompressiveLoad 5%Deflection | ASTM D575 | 2.93 MPa |
| CompressiveLoad | CompressiveLoad 50%Deflection | ASTM D575 | 31.0 MPa |
| CompressiveLoad | CompressiveLoad 10%Deflection | ASTM D575 | 5.52 MPa |
| CompressiveLoad | CompressiveLoad 15%Deflection | ASTM D575 | 7.58 MPa |
| CompressiveLoad | CompressiveLoad 2%Deflection | ASTM D575 | 1.03 MPa |
| CompressiveLoad | CompressiveLoad 20%Deflection | ASTM D575 | 10.3 MPa |
| CompressiveLoad | CompressiveLoad 25%Deflection | ASTM D575 | 12.4 MPa |