PC TARFLON™ AZ1900T IDEMITSU JAPAN
- Đặc tính:Chống cháy
- Lĩnh vực ứng dụng:Ứng dụng ô tôBộ phận gia dụng
- Giấy chứng nhận:UL
So sánh
Xem giáBảng thông số kỹ thuật
| optical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| transmissivity | transmissivity | ISO 13468-1 | 85.0to89.0 % |
| other | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| characteristic | characteristic | 高流动型 |
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating 1.5mm | UL 94 | V-0 |
| UL flame retardant rating | UL flame retardant rating 1.5 mm | UL 94 | V-0 |
| ISO | ISO | >PC< |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| bending strength | bending strength | ISO 178 | 90.0 Mpa |
| Bending modulus | Bending modulus | ISO 178 | 2300 Mpa |
| Nominal tensile fracture strain | Nominal tensile fracture strain | ISO 527-2 | 70 % |
| tensile strength | tensile strength Yield | ISO 527-2 | 65.0 Mpa |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength | ISO 179 | 65 kJ/m² |
| bending strength | bending strength | ISO 178 | 90 Mpa |
| Bending modulus | Bending modulus | ISO 178 | 2300 Mpa |
| Elongation at Break | Elongation at Break | ISO 527-2 | 70 % |
| tensile strength | tensile strength Yield | ISO 527-2 | 65 Mpa |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap | ASTM D256/ISO 179 | - kg·cm/cm(J/M)ft·lb/in |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 80 kg·cm/cm(J/M)ft·lb/in |
| Elongation at Break | Elongation at Break | ASTM D638/ISO 527 | 92 % |
| Tensile modulus | Tensile modulus | ASTM D638/ISO 527 | 2300 kg/cm²(MPa)[Lb/in²] |
| tensile strength | tensile strength | ASTM D638/ISO 527 | 68 kg/cm²(MPa)[Lb/in²] |
| elongation | elongation | ASTM D638/ISO 527 | 64 % |
| Rockwell hardness | Rockwell hardness | ASTM D785 | - |
| Bending modulus | Bending modulus | ASTM D790/ISO 178 | 2400 kg/cm²(MPa)[Lb/in²] |
| Elongation at Break | Elongation at Break | ASTM D638/ISO 527 | 92 % |
| tensile strength | tensile strength Yield | ISO 527-2 | 65.0 Mpa |
| Nominal tensile fracture strain | Nominal tensile fracture strain | ISO 527-2 | 95 % |
| bending strength | bending strength | ISO 178 | 90.0 Mpa |
| injection | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| drying temperature | drying temperature | 120 °C | |
| drying time | drying time | 5.0 to 8.0 hr | |
| Temperature at the rear of the barrel | Temperature at the rear of the barrel | 260 to 300 °C | |
| Temperature in the middle of the barrel | Temperature in the middle of the barrel | 260 to 300 °C | |
| Temperature at the front of the material cylinder | Temperature at the front of the material cylinder | 260 to 300 °C | |
| Mold temperature | Mold temperature | 80 to 120 °C |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating 4.00 mm | UL 94 | 5VA |
| UL flame retardant rating | UL flame retardant rating 1.50 mm | UL 94 | V-0 |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D696 | 0.000065 cm/cm/℃ |
| Hot deformation temperature | Hot deformation temperature 1.8 MPa, Unannealed | ISO 75-2/A | 125 °C |
| Hot deformation temperature | Hot deformation temperature 0.45MPa,Unannealed | ISO 75-2/B | 140 °C |
| Hot deformation temperature | Hot deformation temperature 1.8MPa,Unannealed | ISO 75-2/A | 125 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD | ISO 11359-2 | 6.5E-05 cm/cm/°C |
| RTI Elec | RTI Elec | UL 746 | 80.0 °C |
| RTI Imp | RTI Imp | UL 746 | 80.0 °C |
| RTI Str | RTI Str | UL 746 | 80.0 °C |
| Combustibility (rate) | Combustibility (rate) | UL 94 | V-0/1.5mm |
| Hot deformation temperature | Hot deformation temperature HDT | ASTM D648/ISO 75 | 131 ℃（℉） |
| Vicat softening temperature | Vicat softening temperature | ASTM D1525/ISO R306 | - ℃（℉） |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | - mm/mm.℃ |
| Hot deformation temperature | Hot deformation temperature 1.8 MPa, Unannealed | ISO 75-2/A | 125 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion Flow | ISO 11359-2 | 6.5E-5 cm/cm/°C |
| RTI Elec | RTI Elec | UL 746 | 80.0 °C |
| RTI Imp | RTI Imp | UL 746 | 80.0 °C |
| RTI | RTI | UL 746 | 80.0 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Water absorption rate | Water absorption rate Equilibrium,23°C,50%RH | ISO 62 | 0.23 % |
| Water absorption rate | Water absorption rate Equilibrium, 23℃, 50% RH | ISO 62 | 0.23 % |
| Shrinkage rate | Shrinkage rate MD: 2.00 mm | Internal Method | 0.5-0.7 % |
| Shrinkage rate | Shrinkage rate TD | Internal Method | 0.5-0.7 % |
| Melt Volume Flow Rate (MVR) | Melt Volume Flow Rate (MVR) MVR | ISO 1133 | 5 cm3/10min |
| Shrinkage rate | Shrinkage rate MD:2.00mm | Internal Method | 0.50-0.70 % |
| Shrinkage rate | Shrinkage rate TD:2.00mm | Internal Method | 0.50-0.70 % |
| Spiral flow length | Spiral flow length | Internal Method | 48.0 CM |
| Melt Volume Flow Rate (MVR) | Melt Volume Flow Rate (MVR) 300°C/1.2kg | ISO 1133 | 5.00 cm3/10min |
| density | density | ASTM D792/ISO 1183 | 1.20 |
| Shrinkage rate | Shrinkage rate | ASTM D955 | 0.5-0.7 % |
| melt mass-flow rate | melt mass-flow rate | ASTM D1238/ISO 1133 | - g/10min |
| Water absorption rate | Water absorption rate | ASTM D570/ISO 62 | - % |
| Melt Volume Flow Rate (MVR) | Melt Volume Flow Rate (MVR) 300°C/1.2 kg | ISO 1133 | 18.0 cm3/10min |
| Spiral flow length | Spiral flow length | Internal Method | 29.0 CM |
| Shrinkage rate | Shrinkage rate 横向Flow : 2.00 mm | Internal Method | 0.50 - 0.70 % |
| Shrinkage rate | Shrinkage rate Flow : 2.00 mm | Internal Method | 0.50 - 0.70 % |
| Water absorption rate | Water absorption rate Equilibrium, 23°C, 50% RH | ISO 62 | 0.23 % |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Dielectric constant | Dielectric constant 1 MHz | IEC 60250 | 2.85 |
| Dielectric strength | Dielectric strength | IEC 60243-1 | 30 KV/mm |
| Volume resistivity | Volume resistivity | ASTM D257/IEC 60093 | - Ω.cm |
| Dielectric constant | Dielectric constant 1MHz | IEC 60250 | 2.85 |
| Dielectric strength | Dielectric strength | IEC 60243-1 | 30 KV/mm |
| Dielectric constant | Dielectric constant 1 MHz | IEC 60250 | 2.85 |
| Compared to the anti leakage trace index | Compared to the anti leakage trace index | UL 746 | PLC 2 |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Rockwell hardness | Rockwell hardness R-Sale | ISO 2039-2 | 120 |
| Rockwell hardness | Rockwell hardness M-Sale | ISO 2039-2 | 50 |
| Rockwell hardness | Rockwell hardness M -Sale | ISO 2039-2 | 50 |
| Rockwell hardness | Rockwell hardness R -Sale | ISO 2039-2 | 120 |
| Supplementary Information | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| ISO Shortcut | ISO Shortcut | >PC< |