PC LEXAN™ HPS6R-1125 SABIC INNOVATIVE CANADA
- Đặc tính:Dòng chảy cao
- Lĩnh vực ứng dụng:Chăm sóc y tếThuốc
So sánh
Xem giáBảng thông số kỹ thuật
| impact performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Charpy Notched Impact Strength | Charpy Notched Impact Strength -30°C | ISO 179/1eA | 15 kJ/m² |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength 23°C | ISO 179/1eA | 75 kJ/m² |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch -30°C | ISO 179/1eU | NoBreak |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch 23°C | ISO 179/1eU | NoBreak |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -30°C | ISO 180/1A | 10 kJ/m² |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23°C | ISO 180/1A | 70 kJ/m² |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength -30°C | ISO 180/1U | NoBreak |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength 23°C | ISO 180/1U | NoBreak |
| Dart impact | Dart impact 23°C,EnergyatPeakLoad | ASTM D3763 | 65.0 J |
| Dart impact | Dart impact 23°C,TotalEnergy | ASTM D3763 | 65.0 J |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Tensile modulus | Tensile modulus | ASTM D638 | 2310 Mpa |
| Tensile modulus | Tensile modulus | ISO 527-2/1 | 2300 Mpa |
| tensile strength | tensile strength Yield | ASTM D638 | 62.1 Mpa |
| tensile strength | tensile strength Yield | ISO 527-2/50 | 60.0 Mpa |
| tensile strength | tensile strength Break | ASTM D638 | 68.9 Mpa |
| tensile strength | tensile strength Break | ISO 527-2/50 | 75.0 Mpa |
| elongation | elongation Yield | ASTM D638 | 6.5 % |
| Tensile strain | Tensile strain Yield | ISO 527-2/50 | 6.0 % |
| elongation | elongation Break | ASTM D638 | 140 % |
| Tensile strain | Tensile strain Break | ISO 527-2/50 | 140 % |
| Bending modulus | Bending modulus 50.0mmSpan | ASTM D790 | 2340 Mpa |
| Bending modulus | Bending modulus | ISO 178 | 2250 Mpa |
| bending strength | bending strength | ISO 178 | 95.0 Mpa |
| bending strength | bending strength Yield,50.0mmSpan | ASTM D790 | 97.9 Mpa |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion TD：-40to40°C | ASTME831 | 5.7E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion TD：-40to40°C | ISO 11359-2 | 6E-05 cm/cm/°C |
| Hot deformation temperature | Hot deformation temperature 0.45MPa,Unannealed,6.40mm | ASTM D648 | 138 °C |
| Hot deformation temperature | Hot deformation temperature 1.8MPa,Unannealed,3.20mm | ASTM D648 | 124 °C |
| Hot deformation temperature | Hot deformation temperature 1.8MPa,Unannealed,6.40mm | ASTM D648 | 132 °C |
| Hot deformation temperature | Hot deformation temperature 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 124 °C |
| Vicat softening temperature | Vicat softening temperature | ASTM D152511 | 154 °C |
| Vicat softening temperature | Vicat softening temperature -- | ISO 306/B50 | 143 °C |
| Vicat softening temperature | Vicat softening temperature -- | ISO 306/B120 | 140 °C |
| Ball Pressure Test | Ball Pressure Test 75°C | IEC 60695-10-2 | Pass |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD：-40to40°C | ASTME831 | 6.2E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD：-40to40°C | ISO 11359-2 | 6E-05 cm/cm/°C |
| Hot deformation temperature | Hot deformation temperature 0.45MPa,Unannealed,3.20mm | ASTM D648 | 135 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| melt mass-flow rate | melt mass-flow rate 300°C/1.2kg | ASTM D1238 | 7.0 g/10min |
| melt mass-flow rate | melt mass-flow rate 300°C/5.0kg | ASTM D1238 | 110 g/10min |
| Melt Volume Flow Rate (MVR) | Melt Volume Flow Rate (MVR) 300°C/1.2kg | ISO 1133 | 6.50 cm3/10min |
| Shrinkage rate | Shrinkage rate MD：--2 | Internal Method | 0.50-0.70 % |
| Shrinkage rate | Shrinkage rate MD：3.20mm | Internal Method | 0.50-0.70 % |
| Shrinkage rate | Shrinkage rate TD：3.20mm | Internal Method | 0.50-0.70 % |
| Water absorption rate | Water absorption rate 24hr | ASTM D570 | 0.15 % |
| Water absorption rate | Water absorption rate Saturation,23°C | ISO 62 | 0.35 % |
| Water absorption rate | Water absorption rate Equilibrium,23°C,50%RH | ISO 62 | 0.15 % |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Rockwell hardness | Rockwell hardness R-Scale | ASTM D785 | 118 |
