PA66 2701TB HENAN SHENMA NYLON

  • Đặc tính:
    2701TB

Bảng thông số kỹ thuật

Other performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Water absorption rate

Water absorption rate

23℃Saturation

ISO 62-- %
density

density

ISO 1183-- g/cm³
Shrinkage rate

Shrinkage rate

垂直,-

--- %
Shrinkage rate

Shrinkage rate

平行,-

--- %
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Elongation at Break

Elongation at Break

Dry

ISO 52717.7 %
tensile strength

tensile strength

Dry

ISO 52767.7 Mpa
bending strength

bending strength

Dry

ISO 17888.5 Mpa
Impact strength of cantilever beam gap

Impact strength of cantilever beam gap

Dry

ISO 180-- kJ/m²
Tensile modulus

Tensile modulus

Dry

ISO 527-- GPa
Charpy Notched Impact Strength

Charpy Notched Impact Strength

Dry

ISO 17911.2 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

Dry

ISO 179不断 kJ/m²
Bending modulus

Bending modulus

Dry

ISO 1782.1 GPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

1.80MPa

ISO 75-- °C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

ISO 11359-- 10-5k
melt mass-flow rate

melt mass-flow rate

Dry

ISO 1133-- g/10min
Melting temperature

Melting temperature

Dry

ISO 3146-- °C
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Dielectric strength

Dielectric strength

Dry

IEC 243-- KV/mm
Volume resistivity

Volume resistivity

Dry/湿态

IEC 93-- Ω.cm
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.