PA66 TORZEN® T3000HS1L INVISTA USA

Bảng thông số kỹ thuật

mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of cantilever beam gap

Impact strength of cantilever beam gap

-30℃

ISO 18017 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23℃

ISO 179无断裂
Charpy Notched Impact Strength

Charpy Notched Impact Strength

-30℃

ISO 179无断裂
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23℃

ISO 17982 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

-40℃

ISO 17919 kJ/m²
Bending modulus

Bending modulus

ISO 1781900 Mpa
Tensile strain

Tensile strain

Break

ISO 527-250 %
Tensile strain

Tensile strain

Yield

ISO 527-24.5 %
tensile strength

tensile strength

Yield

ISO 527-247.0 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

Flow: 23 to 55℃, 2.00 mm

ISO 11359-20.00014 cm/cm/℃
Melting temperature

Melting temperature

ISO 11357-3262 °C
Hot deformation temperature

Hot deformation temperature

1.8 MPa, Unannealed

ISO 75-2/A61.0 °C
Hot deformation temperature

Hot deformation temperature

0.45 MPa, Unannealed

ISO 75-2/B148 °C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

Across Flow: 23 to 55℃, 2.00 mm

ISO 11359-20.00012 cm/cm/℃
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shrinkage rate

Shrinkage rate

MD: 2.00 mm

ISO 294-41.7-2.0 %
Shrinkage rate

Shrinkage rate

TD: 2.00 mm

ISO 294-41.6-1.9 %
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.