Plastomer, Ethylene-based

Plastomer, Ethylene-based Queo™ 8210 Borealis AG

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of cantilever beam gap

Impact strength of cantilever beam gap

23°C

ISO 180/1ANoBreak
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
tensile strength

tensile strength

Break

ISO 527-2/5A13.0 MPa
Tensile strain

Tensile strain

Break

ISO 527-2/5A1000 %
Bending modulus

Bending modulus

ISO 17824.0 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Vicat softening temperature

Vicat softening temperature

ISO 306/A45.0 °C
Melting temperature

Melting temperature

ISO 1135775.0 °C
Brittle temperature

Brittle temperature

ASTM D746<-76.0 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
density

density

ISO 11830.882 g/cm³
melt mass-flow rate

melt mass-flow rate

190°C/2.16kg

ISO 113310 g/10min
Environmental stress cracking resistance

Environmental stress cracking resistance

ASTM D1693B>1000 hr
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shore hardness

Shore hardness

ShoreA

ISO 86884
Shore hardness

Shore hardness

ShoreD

ISO 868<30
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.