PC Iupilon® GSH2010R2 Mitsubishi Chemical Corporation

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 17960 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23°C

ISO 17910 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

0.40mm

UL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
bending strength

bending strength

ISO 178130 MPa
Bending modulus

Bending modulus

ISO 1783900 MPa
Tensile strain

Tensile strain

Break

ISO 527-23.8 %
tensile strength

tensile strength

Break

ISO 527-282.0 MPa
Tensile modulus

Tensile modulus

ISO 527-24400 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

TD

ISO 11359-26.7E-05 cm/cm/°C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

MD

ISO 11359-24E-05 cm/cm/°C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A140 °C
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B145 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shrinkage rate

Shrinkage rate

吸水率(Saturation,23°C)

0.14 %
Shrinkage rate

Shrinkage rate

MD:3.20mm

0.30to0.50 %
Shrinkage rate

Shrinkage rate

TD:3.20mm

0.40to0.60 %
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

300°C/1.2kg

ISO 11339.00 cm³/10min
melt mass-flow rate

melt mass-flow rate

300°C/1.2kg

ISO 113310 g/10min
density

density

ISO 11831.27 g/cm³
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Compared to the anti leakage trace index

Compared to the anti leakage trace index

CTI

UL 746PLC 3
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.