TPE G 616 Alphagary

Bảng thông số kỹ thuật

flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

1.5mm

UL 94V-0
elastomerĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
tear strength

tear strength

2.00mm

ISO 34-135 kN/m
Permanent compression deformation

Permanent compression deformation

22°C,72hr

ISO 81525 %
Permanent compression deformation

Permanent compression deformation

70°C,22hr

ISO 81559 %
Permanent compression deformation

Permanent compression deformation

100°C,22hr

ISO 81574 %
tensile strength

tensile strength

100%Strain,2.00mm

ISO 372.60 MPa
tensile strength

tensile strength

Yield,2.00mm

ISO 376.50 MPa
elongation

elongation

Break,2.00mm

ISO 37560 %
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
density

density

ISO 11831.24 g/cm³
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shore hardness

Shore hardness

ShoreA,10Sec,6.50mm

ISO 86865
agingĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Change rate of tensile strength in air

Change rate of tensile strength in air

125°C,336hr

ISO 1889.0 %
Tensile stress change rate

Tensile stress change rate

125°C,336hr,Break

ISO 1886.0 %
Change rate of hardness (Shore) in the air

Change rate of hardness (Shore) in the air

ShoreA,125°C,336hr

ISO 188-1.0
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.