PPS Torelina® A310MX04 TORAY JAPAN
- Đặc tính:Chống cháyGia cố sợi thủy tinhTăng cường khoáng sảnĐộ cứng caoSức mạnh caoChịu nhiệt độ cao
- Lĩnh vực ứng dụng:Lớp sợi
- Giấy chứng nhận:UL
So sánh
Xem giáBảng thông số kỹ thuật
| other | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| characteristic | characteristic | 标准 | |
| Color | Color | 本色.黑 |
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating | UL -94 | V-0 0.36mm |
| UL flame retardant rating | UL flame retardant rating | UL -94 | V-0 0.74mm |
| UL flame retardant rating | UL flame retardant rating | UL -94 | V-0 1.50mm |
| UL flame retardant rating | UL flame retardant rating | UL -94 | V-0 3.00mm |
| UL flame retardant rating | UL flame retardant rating | UL -94 | V-0.5VA 2.00mm |
| Basic Performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Water absorption rate | Water absorption rate | ASTM D-570 | 0.02 % |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Charpy Notched Impact Strength | Charpy Notched Impact Strength | ASTM D256/ISO 179 | 8 kg·cm/cm(J/M)ft·lb/in |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength | ASTM D256/ISO 179 | 18 kg·cm/cm(J/M)ft·lb/in |
| Elongation at Break | Elongation at Break | ASTM D638/ISO 527 | 0.8 % |
| tensile strength | tensile strength | ASTM D638/ISO 527 | 130 kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | Rockwell hardness | ASTM D785 | 123 |
| Bending modulus | Bending modulus | ASTM D790/ISO 178 | 22 kg/cm²(MPa)[Lb/in²] |
| bending strength | bending strength | ASTM D790/ISO 178 | 210 kg/cm²(MPa)[Lb/in²] |
| Elongation at Break | Elongation at Break 23°C | ISO 527-2 | 0.8 % |
| bending strength | bending strength 23°C | ISO 178 | 210 Mpa |
| Bending modulus | Bending modulus 23°C | ISO 178 | 22000 Mpa |
| shear strength | shear strength | ISO 178 | 60 Mpa |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength 23°C | ISO 179/1eA | 8.0 kJ/m² |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch 23°C | ISO 179/1eU | 18 kJ/m² |
| tensile strength | tensile strength 23°C | ISO 527-2 | 130 Mpa |
| bending strength | bending strength | ASTM D-790 | 200 Mpa |
| Elongation at Break | Elongation at Break | ASTM D-732 | 60 |
| limiting pv value | limiting pv value | 东丽法 | 815 KJ/m |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap Notched23℃ | ASTM D-256 | 90 J/m |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap Unnotched23℃ | ASTM D-256 | 20 KJ/m |
| abrasion | abrasion | ASTM D-1044 | 70 mg/1000回 |
| tensile strength | tensile strength | ASTM D-638 | 140 Mpa |
| Friction coefficient | Friction coefficient 对钢 | ASTM D-1894 | 0.30 |
| tensile strength | tensile strength | ASTM D-638 | 1.2 % |
| Shore hardness | Shore hardness | ASTM D-785 | 123 洛氏 |
| bending strength | bending strength | ASTM D-790 | 17.6 GPa |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Combustibility (rate) | Combustibility (rate) | UL 94 | V-0 |
| Hot deformation temperature | Hot deformation temperature HDT | ASTM D648/ISO 75 | >260 ℃（℉） |
| Melting temperature | Melting temperature | 278 ℃（℉） | |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 1.7 mm/mm.℃ |
| Hot deformation temperature | Hot deformation temperature 1.80MPaAnnealed | ISO 75-2/Af | >260 °C |
| Vicat softening temperature | Vicat softening temperature Melting Temperature | ISO 11357-3 | 278 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD | ISO 11359-2 | 1.7E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion TD | ISO 11359-2 | 2.4E-05 cm/cm/°C |
| Hot deformation temperature | Hot deformation temperature 1.82MPa | ASTM D-648 | >260 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion Flow | ASTM D-696 | 1.6 |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion 垂重方向 | ASTM D-696 | 2.4 |
| Melting temperature | Melting temperature | DSC | 278 °C |
| Combustibility | Combustibility | UL -94 | V-0 |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| density | density | ASTM D792/ISO 1183 | 1.97 |
| Shrinkage rate | Shrinkage rate | ASTM D955 | 0.2 % |
| Water absorption rate | Water absorption rate | ASTM D570/ISO 62 | 0.02 % |
| Water absorption rate | Water absorption rate (23°C,24hr) | ISO 62 | 0.02 % |
| Shrinkage rate | Shrinkage rate Flow | 东丽法 | 0.15 % |
| Shrinkage rate | Shrinkage rate 垂重方向 | 东丽法 | 0.55 % |
320℃,98MPa,1mm厚，Flow长 | 东丽法 | 90 |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Dielectric constant | Dielectric constant | ASTM D150/IEC 60250 | 5 |
| Volume resistivity | Volume resistivity | ASTM D257/IEC 60093 | 1014 Ω.cm |
| Volume resistivity | Volume resistivity | IEC 60093 | 1E+19 Ω.cm |
| Dielectric strength | Dielectric strength | IEC 60243-1 | 19 KV/mm |
| Dielectric constant | Dielectric constant 23°C | IEC 60250 | 5.1 1MHz |
| Dissipation factor | Dissipation factor 23°C | IEC 60250 | 2E-03 1MHz |
| Dielectric strength | Dielectric strength | ASTM D-149 | 15 MV/m |
| Inherent resistance of volume | Inherent resistance of volume | ASTM D-257 | 10 Ω.m |
| Arc resistance | Arc resistance W电极 | ASTM D-495 | 182 秒 |
| Induced positive connection | Induced positive connection 10 | ASTM D-150 | 0.002 |
| Dielectric constant | Dielectric constant 10 | ASTM D-150 | 5.8 |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Rockwell hardness | Rockwell hardness | ISO 2039-2 | 123 R |