PA12 Grilamid®  LV-5H BK9288 EMS-CHEMIE USA

  • Đặc tính:
    Chịu được tác động nhiệt
    Rào cản khí
  • Lĩnh vực ứng dụng:
    Ứng dụng điện
    Trang chủ
    Nhà ở
    Hàng thể thao
    Ứng dụng khí nén
    Ứng dụng công nghiệp
    Phụ kiện kỹ thuật
    Ứng dụng trong lĩnh vực ô
    Công cụ/Other tools
    Hàng gia dụng
    Vỏ máy tính xách tay
    Ứng dụng thủy lực
    Bộ phận gia dụng
    Thiết bị y tế
    Lĩnh vực ứng dụng hàng ti

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

-30°C

kJ/m²90
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

kJ/m²90
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Flammability level

Flammability level

0.8mm

HB --
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

MPa12000 11500
tensile strength

tensile strength

Break

155 MPa
Tensile strain

Tensile strain

Break

%5.0 6.0
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

MD

cm/cm/°C1.5E-05 --
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

TD

cm/cm/°C1.2E-04 --
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

°C165 --
Hot deformation temperature

Hot deformation temperature

8.0MPa,Unannealed

°C125 --
Continuous use temperature

Continuous use temperature

--3

°C90.0to120 --
Continuous use temperature

Continuous use temperature

--4

°C150 --
Melting temperature

Melting temperature

°C178 --
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shrinkage rate

Shrinkage rate

TD

%0.50 --
Shrinkage rate

Shrinkage rate

MD

%0.10 --
Water absorption rate

Water absorption rate

Saturation,23°C

%0.80 --
Water absorption rate

Water absorption rate

Equilibrium,23°C,50%RH

%0.40 --
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Surface resistivity

Surface resistivity

ohms-- 1E+12
Volume resistivity

Volume resistivity

ohms·cm-- 1E+13
Dielectric strength

Dielectric strength

kV/mm--
Compared to the anti leakage trace index

Compared to the anti leakage trace index

V --
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shore hardness

Shore hardness

ShoreD,15Sec

82 --
Ball Pressure Test

Ball Pressure Test

MPa155 --
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.

Có thể bạn cũng quan tâm