PA6 Amilan® CM1017 TORAY JAPAN
- Đặc tính:Độ cứng cao
- Lĩnh vực ứng dụng:Lĩnh vực ô tôNhà ởLinh kiện điệnThiết bị điện
So sánh
Xem giáBảng thông số kỹ thuật
| impact performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch 23°C | 无断裂 -- | |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch -40°C | 无断裂 -- |
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating 0.79mm | V-2 -- |
| Basic Performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Water absorption rate | Water absorption rate 23℃，24hr | ASTM D-570 | 无水｜1.8 % |
| Water absorption rate | Water absorption rate 23℃，24hr | ASTM D-570 | 3.5%水｜- % |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Bending modulus | Bending modulus 80℃ | ASTM D-790 | 3.5%水｜4000 kg/cm2 |
| Bending modulus | Bending modulus 80℃ | ASTM D-790 | 无水｜8000 kg/cm2 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 3.5%水｜90 R-标度 |
| bending strength | bending strength 23℃ | ASTM D-790 | 3.5%水｜450 kg/cm2 |
| bending strength | bending strength 23℃ | ASTM D-790 | 无水｜1100 kg/cm2 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 3.5%水｜- M-标度 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 无水｜83 M-标度 |
| compressive strength | compressive strength 23℃ | ASTM D-695 | 3.5%水｜- kg/cm2 |
| compressive strength | compressive strength 23℃ | ASTM D-695 | 无水｜890 kg/cm2 |
| Bending modulus | Bending modulus 23℃ | ASTM D-790 | 3.5%水｜10000 kg/cm2 |
| Bending modulus | Bending modulus 23℃ | ASTM D-790 | 无水｜29000 kg/cm2 |
| Rockwell hardness | Rockwell hardness | ASTM D785 | 83 |
| Elongation at Break | Elongation at Break 23℃ | ASTM D-638 | 无水｜180 % |
| Elongation at Break | Elongation at Break 23℃ | ASTM D-638 | 3.5%水｜<200 % |
| Shear strength | Shear strength 23℃ | ASTM D-732 | 无水｜740 kg/cm2 |
| Shear strength | Shear strength 23℃ | ASTM D-732 | 3.5%水｜690 kg/cm2 |
| bending strength | bending strength 80℃ | ASTM D-790 | 无水｜500 kg/cm2 |
| bending strength | bending strength 80℃ | ASTM D-790 | 3.5%水｜300 kg/cm2 |
| bending strength | bending strength -40℃ | ASTM D-790 | 无水｜1500 kg/cm2 |
| bending strength | bending strength -40℃ | ASTM D-790 | 3.5%水｜1450 kg/cm2 |
| Rockwell hardness | Rockwell hardness 23℃ | ASTM D-785 | 无水｜119 R-标度 |
| tensile strength | tensile strength 80℃，Yield | ASTM D-638 | 3.5%水｜220 kg/cm2 |
| Tensile strain | Tensile strain Break,23°C | % | 38 |
| Bending modulus | Bending modulus -40°C | MPa | 3900 3600 |
| tensile strength | tensile strength -40，Yield | ASTM D-638 | 无水｜1230 kg/cm2 |
| tensile strength | tensile strength -40，Yield | ASTM D-638 | 3.5%水｜1150 kg/cm2 |
| Bending modulus | Bending modulus -40℃ | ASTM D-790 | 无水｜40000 kg/cm2 |
| Bending modulus | Bending modulus -40℃ | ASTM D-790 | 3.5%水｜37000 kg/cm2 |
| tensile strength | tensile strength 80°C | MPa | 30.0 20.0 |
| Tensile strain | Tensile strain Yield,23°C | % | 1.5 -- |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，Unnotched1/8 | 无水｜无断裂 kg.cm/cm | |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃，Unnotched1/8 | 3.5%水｜- kg.cm/cm | |
| tensile strength | tensile strength 23℃，Yield | ASTM D-638 | 无水｜820 kg/cm2 |
| tensile strength | tensile strength 23℃，Yield | ASTM D-638 | 3.5%水｜420 kg/cm2 |
| tensile strength | tensile strength 80℃，Yield | ASTM D-638 | 无水｜320 kg/cm2 |
| Bending modulus | Bending modulus 23°C | MPa | 3000 1000 |
| Bending modulus | Bending modulus 80°C | MPa | 800 400 |
| bending strength | bending strength -40°C | MPa | 145 140 |
| bending strength | bending strength 23°C | MPa | 120 45.0 |
| bending strength | bending strength 80°C | MPa | 50.0 30.0 |
| Compressive stress | Compressive stress 23°C | MPa | 85.0 -- |
| shear strength | shear strength 23°C | MPa | 75.0 70.0 |
| Taber abraser | Taber abraser 1000Cycles | mg | 3.00to4.00 -- |
| Friction coefficient vs. Metal | Friction coefficient vs. Metal | 0.15to0.20 -- | |
| tensile strength | tensile strength -40°C | MPa | 120 115 |
| tensile strength | tensile strength 23°C | MPa | 85.0 40.0 |
| tensile strength | tensile strength 23℃，Break | ASTM D-638 | 无水｜20 kg/cm2 |
| tensile strength | tensile strength 23℃，Break | ASTM D-638 | 3.5%水｜- kg/cm2 |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap Unnotched1/2"，23℃ | 无水｜5 kg.cm/cm | |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap Unnotched1/2"，23℃ | 3.5%水｜40 kg.cm/cm | |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/2 | 无水｜3.5 kg.cm/cm | |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃，Unnotched1/2 | 3.5%水｜15 kg.cm/cm |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Hot deformation temperature | Hot deformation temperature HDT | ASTM D-648 | 3.5%水｜- °C |
| Hot deformation temperature | Hot deformation temperature HDT | ASTM D-648 | 无水｜190 °C |
| specific heat | specific heat | 3.5%水｜- Cal/g.°C | |
| specific heat | specific heat | 无水｜0.46 Cal/g.°C | |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D-696 | 3.5%水｜- |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion | ASTM D-696 | 无水｜8 10-5cm/cm.℃ |
| thermal conductivity | thermal conductivity | 3.5%水｜- Kcal/m.hr.°C | |
| thermal conductivity | thermal conductivity | 无水｜0.18 Kcal/m.hr.°C | |
| UL-94 flame retardant grade | UL-94 flame retardant grade | UL 94 | 无水｜V-2(1/16") |
| UL-94 flame retardant grade | UL-94 flame retardant grade | UL 94 | 3.5%水｜- |
| Melting temperature | Melting temperature | 225 ℃（℉） | |
| Hot deformation temperature | Hot deformation temperature HDT | ASTM D648/ISO 75 | 190 ℃（℉） |
| Melting temperature | Melting temperature | 差示扫描测热计DSC法 | 225 °C |
| Hot deformation temperature | Hot deformation temperature 18.6kg/cm2 | ASTM D-648 | 无水｜190 °C |
| Hot deformation temperature | Hot deformation temperature 18.6kg/cm2 | ASTM D-648 | 3.5%水｜- °C |
| Hot deformation temperature | Hot deformation temperature 0.45MPa,Unannealed | °C | 190 -- |
| Melting temperature | Melting temperature | °C | 225 -- |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD | cm/cm/°C | 8E-05 -- |
| specific heat | specific heat | J/kg/°C | 1900 -- |
| thermal conductivity | thermal conductivity | W/m/K | 0.25 -- |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Water absorption rate | Water absorption rate | ASTM D570/ISO 62 | 1.8 % |
| density | density | ASTM D792/ISO 1183 | 1.13 |
| Shrinkage rate | Shrinkage rate MD：3.00mm4 | % | 1.0-1.6 -- |
| Water absorption rate | Water absorption rate 23°C,24hr | % | 1.8 -- |
| Water absorption rate | Water absorption rate Saturation,23°C | % | 11 -- |
| Shrinkage rate | Shrinkage rate MD：1.00mm3 | % | 0.50-1.0 -- |
| Taber abraser | Taber abraser 1000g,CS-17 | ASTM D-1044 | 无水｜3-4 mg/1000次 |
| Taber abraser | Taber abraser 1000g,CS-17 | ASTM D-1044 | 3.5%水｜- mg/1000次 |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Dielectric constant | Dielectric constant 106Hz | ASTM D-150 | 无水｜3.4 |
| Volume resistivity | Volume resistivity | ASTM D257/IEC 60093 | 10^12-13 Ω.cm |
| Arc resistance | Arc resistance | sec | 120 -- |
| Compared to the anti leakage trace index | Compared to the anti leakage trace index CTI | V | -- |
| Volume resistivity | Volume resistivity | ASTM D-257 | 无水｜1014-1015 Ω.cm |
| Volume resistivity | Volume resistivity | ASTM D-257 | 3.5%水｜1011-1012 Ω.cm |
| Dissipation factor | Dissipation factor 106Hz | ASTM D-150 | 无水｜0.03 |
| Dissipation factor | Dissipation factor 106Hz | ASTM D-150 | 3.5%水｜- |
| Dielectric strength | Dielectric strength 1/8" | ASTM D-149 | 无水｜20 KV/mm |
| Dielectric strength | Dielectric strength 1/8" | ASTM D-149 | 3.5%水｜- KV/mm |
| Dissipation factor | Dissipation factor 50Hz | ASTM D-150 | 无水｜0.07 |
| Dissipation factor | Dissipation factor 50Hz | ASTM D-150 | 3.5%水｜- |
| Volume resistivity | Volume resistivity | ohms·cm | 1.0E+14-1.0E+15 1.0E+11到1.0E+12 |
| Dissipation factor | Dissipation factor 23°C,50Hz | 0.070 0.10 | |
| Dissipation factor | Dissipation factor 23°C,1kHz | 0.060 0.11 | |
| Dissipation factor | Dissipation factor 23°C,1MHz | 0.030 0.13 | |
| Dielectric strength | Dielectric strength | kV/mm | 20 -- |
| Dielectric constant | Dielectric constant 23°C,50Hz | 4.10 9.00 | |
| Dielectric constant | Dielectric constant 23°C,1kHz | 3.90 8.00 | |
| Dielectric constant | Dielectric constant 23°C,1MHz | 3.40 4.50 | |
| Compared to the Leakage Traceability Index (CTI) | Compared to the Leakage Traceability Index (CTI) | UL 746 | 无水｜≤600 V |
| Compared to the Leakage Traceability Index (CTI) | Compared to the Leakage Traceability Index (CTI) | UL 746 | 3.5%水｜- V |
| Dielectric constant | Dielectric constant 106Hz | ASTM D-150 | 无水｜3.9 |
| Dielectric constant | Dielectric constant 106Hz | ASTM D-150 | 3.5%水｜- |
| Dissipation factor | Dissipation factor 103Hz | ASTM D-150 | 无水｜0.06 |
| Dielectric constant | Dielectric constant 50HZ | ASTM D-150 | 无水｜4.1 |
| Dielectric constant | Dielectric constant 50HZ | ASTM D-150 | 3.5%水｜- |
| Dissipation factor | Dissipation factor 103Hz | ASTM D-150 | 3.5%水｜- |
| Arc resistance | Arc resistance 1/8" | ASTM D-150 | 无水｜121 |
| Arc resistance | Arc resistance 1/8" | ASTM D-150 | 3.5%水｜- |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Rockwell hardness | Rockwell hardness R-Sale,23°C | 119 | |
| Rockwell hardness | Rockwell hardness R-Sale,80°C | 83 -- |
