PA6 UBE 1015GC3 UBE JAPAN

  • Đặc tính:
    Đóng gói: Gia cố sợi thủy
    15% đóng gói theo trọng l
  • Giấy chứng nhận:
    UL

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

ISO 1797.5 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

0.75mm

UL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile strain

Tensile strain

Break

ISO 527-22.8 %
tensile strength

tensile strength

Break

ISO 527-2125 Mpa
Tensile modulus

Tensile modulus

ISO 527-25800 Mpa
bending strength

bending strength

ISO 178190 Mpa
Bending modulus

Bending modulus

ISO 1785300 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A200 °C
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B220 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Water absorption rate

Water absorption rate

Equilibrium,23°C,50%RH

Internal Method2.1 %
Shrinkage rate

Shrinkage rate

MD

Internal Method0.40 %
Shrinkage rate

Shrinkage rate

TD

Internal Method0.70 %
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.

Có thể bạn cũng quan tâm