LCP SUMIKASUPER®  E6808LHF-BZ SUMITOMO JAPAN

  • Đặc tính:
    Thấp cong congHiệu suất đúc tốtTăng cườngGia cố sợi thủy tinhĐóng gói: Sợi thủy tinh d40%Đóng gói theo trọng lượng
  • Lĩnh vực ứng dụng:
    Vỏ máy tính xách tayTrang chủ
  • Giấy chứng nhận:
    UL
  • sort So sánhprice-tag Xem giá

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Suspended wall beam without notch impact strength

Suspended wall beam without notch impact strength

6.40mm

ASTM D256270 J/m
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

0.30mm

UL 94V-0
Extreme Oxygen Index

Extreme Oxygen Index

ISO 48944 %
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
tensile strength

tensile strength

Yield

ASTM D638130 Mpa
elongation

elongation

Break

ASTM D6384.5 %
Bending modulus

Bending modulus

23°C

ASTM D79012500 Mpa
bending strength

bending strength

Yield,23°C

ASTM D790140 Mpa
shear strength

shear strength

ASTM D73254.0 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ASTM D648270 °C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

MD:150°C

Internal Method4E-06 cm/cm/°C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

TD:150°C

Internal Method8.1E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shrinkage rate

Shrinkage rate

MD

Internal Method0.17 %
Shrinkage rate

Shrinkage rate

TD

Internal Method0.40 %
Water absorption rate

Water absorption rate

Saturation

ASTM D5700.020 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Volume resistivity

Volume resistivity

ASTM D2571E+15 ohms·cm
Dielectric constant

Dielectric constant

1MHz

ASTM D1503.80
Dielectric constant

Dielectric constant

1.00GHz

ASTM D1503.60
Dissipation factor

Dissipation factor

1MHz

ASTM D1500.038
Dissipation factor

Dissipation factor

1.00GHz

ASTM D1504E-03
Arc resistance

Arc resistance

ASTM D495140 sec
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Rockwell hardness

Rockwell hardness

R-Scale

ASTM D78597
Supplementary InformationĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Solder resistance

Solder resistance

Internal Method280 °C
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.