TPV Santoprene™ 111-35 CELANESE USA
- Đặc tính:Chống lão hóa
- Lĩnh vực ứng dụng:Lĩnh vực điệnLĩnh vực điện tửNắp chaiLĩnh vực ô tôPhụ tùng máy inĐiện thoạiLĩnh vực ứng dụng xây dựnMáy giặtĐóng góiHàng thể thaoỨng dụng trong lĩnh vực ô
Bảng thông số kỹ thuật
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating 1.5mm | UL 94 | HB |
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Permanent compression deformation | Permanent compression deformation 125°C,70hr | ISO 815 | 31 % |
| Permanent compression deformation | Permanent compression deformation 23°C,22hr | ISO 815 | 10 % |
| Permanent compression deformation | Permanent compression deformation 125°C,70hr | ASTM D395B | 31 % |
| Permanent compression deformation | Permanent compression deformation 23°C,22hr | ASTM D395B | 10 % |
| tear strength | tear strength 23°C,Across Flow (Across Flow) | ISO 34-1 | 10 kN/m |
| tear strength | tear strength 23°C,横向Flow | ASTM D624 | 10.0 kN/m |
| elongation | elongation Break,23°C,Across Flow | ISO 37 | 330 % |
| elongation | elongation Break,23°C,Across Flow | ASTM D412 | 330 % |
| tensile strength | tensile strength Break,23°C | ISO 37 | 2.90 Mpa |
| tensile strength | tensile strength Break,23°C,横向Flow | ASTM D412 | 2.90 Mpa |
| Tensile stress | Tensile stress 100%Strain,23°C,横向Flow | ISO 37 | 1.00 Mpa |
| Tensile stress | Tensile stress 100%Strain,23°C,横向Flow | ASTM D412 | 1.00 Mpa |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Brittle temperature | Brittle temperature | ISO 812 | -63.0 °C |
| Brittle temperature | Brittle temperature | ASTM D746 | -63.0 °C |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Shore hardness | Shore hardness ShoreA,15Sec,23°C | ISO 868 | 38 |
| aging | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,125°C,168hr,inIRM903Oil | ASTM D471 | -30 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,100°C,168hr,inIRM903Oil | ASTM D471 | -26 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,100°C,168hr,inDeionizedWater | ASTM D471 | 0.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inTrichloroethylene | ASTM D471 | 1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inSulfuricAcid,98% | ASTM D471 | -2.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inSodiumHydroxide,50% | ASTM D471 | 4.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inSodiumChloride,15% | ASTM D471 | 2.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inMethylethylketone | ASTM D471 | 15 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inIsopropylAlcohol | ASTM D471 | 5.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inHydrochloricAcid,10% | ASTM D471 | -1.0 |
| Change rate of tensile strength in air | Change rate of tensile strength in air 150°C,168hr | ASTM D573 | -29 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inIsopropylAlcohol | ISO 1817 | 27 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inMethylethylketone | ISO 1817 | 43 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSodiumChloride,15% | ISO 1817 | -14 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 150°C,168hr | ISO 188 | -29 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 150°C,168hr | ASTM D573 | -1.0 % |
| Hardness change rate in the air | Hardness change rate in the air ShoreA,150°C,168hr | ASTM D573 | -1.0 |
| Shore hardness | Shore hardness ShoreA,150°C,168hr | ISO 188 | -1.0 |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inAceticAcid | ASTM D471 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inCyclohexane | ASTM D471 | 4040 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inDetergent(Tide),2.5% | ASTM D471 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inEthanol,95% | ASTM D471 | -8.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inHydrochloricAcid,10% | ASTM D471 | 0.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inIsopropylAlcohol | ASTM D471 | 53 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inMethylethylketone | ASTM D471 | 80 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inSodiumChloride,15% | ASTM D471 | -7.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inSodiumHydroxide,50% | ASTM D471 | -3.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inSulfuricAcid,98% | ASTM D471 | -10 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inTrichloroethylene | ASTM D471 | 77 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr,inDeionizedWater | ASTM D471 | -17 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 100°C,168hr,inIRM903Oil | ASTM D471 | -63 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,70hr,inIRM903Oil | ASTM D471 | -65 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,168hr,inIRM903Oil | ASTM D471 | -67 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inAceticAcid | ISO 1817 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inCyclohexane | ISO 1817 | 4040 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inDetergent(Tide),2.5% | ISO 1817 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inEthanol,95% | ISO 1817 | -8.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inHydrochloricAcid,10% | ISO 1817 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSodiumHydroxide,50% | ISO 1817 | -5.0 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inTrichloroethylene | ISO 1817 | -20 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inCyclohexane | ISO 1817 | -11 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inSodiumHydroxide,50% | ISO 1817 | -0.30 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inSodiumChloride,15% | ISO 1817 | 0.10 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inHydrochloricAcid,10% | ISO 1817 | 0.20 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inEthanol,95% | ISO 1817 | 0.20 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inDetergent(Tide),2.5% | ISO 1817 | 0.90 % |
| Quality change rate | Quality change rate 100°C,168hr,inDeionizedWater | ISO 1817 | 6.2 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inAceticAcid | ISO 1817 | 6.9 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inSulfuricAcid,98% | ISO 1817 | 7.2 % |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inAceticAcid | ISO 1817 | -1.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inCyclohexane | ISO 1817 | -11 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inDetergent(Tide),2.5% | ISO 1817 | 2.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inEthanol,95% | ISO 1817 | 1.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inHydrochloricAcid,10% | ISO 1817 | -1.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inIsopropylAlcohol | ISO 1817 | 5.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inMethylethylketone | ISO 1817 | 15 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inSodiumChloride,15% | ISO 1817 | 2.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inSodiumHydroxide,50% | ISO 1817 | 4.0 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inSulfuricAcid,98% | ISO 1817 | -2.0 |
| Quality change rate | Quality change rate 23°C,168hr,inMethylethylketone | ASTM D471 | -41 % |
| Quality change rate | Quality change rate 23°C,168hr,inSodiumChloride,15% | ASTM D471 | 0.10 % |
| Quality change rate | Quality change rate 23°C,168hr,inSodiumHydroxide,50% | ASTM D471 | -0.30 % |
| Quality change rate | Quality change rate 23°C,168hr,inSulfuricAcid,98% | ASTM D471 | 7.2 % |
| Quality change rate | Quality change rate 23°C,168hr,inTrichloroethylene | ASTM D471 | -20 % |
| Quality change rate | Quality change rate 100°C,168hr,inDeionizedWater | ASTM D471 | 6.2 % |
| Quality change rate | Quality change rate 100°C,168hr,inIRM903Oil | ASTM D471 | 93 % |
| Quality change rate | Quality change rate 125°C,168hr,inIRM903Oil | ASTM D471 | 100 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inMethylethylketone | ISO 1817 | -41 % |
| Quality change rate | Quality change rate 23.0°C,168hr,inIsopropylAlcohol | ISO 1817 | -25 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSulfuricAcid,98% | ISO 1817 | -47 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inTrichloroethylene | ISO 1817 | 56 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,inDeionizedWater | ISO 1817 | -18 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,inIRM903Oil | ISO 1817 | -57 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inSodiumChloride,15%,Break | ISO 1817 | -7.0 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inSodiumHydroxide,50%,Break | ISO 1817 | -3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,70hr,inIRM903Oil | ISO 1817 | -61 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,168hr,inIRM903Oil | ISO 1817 | -67 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inAceticAcid | ASTM D471 | -3.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inCyclohexane | ASTM D471 | 63 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inDetergent(Tide),2.5% | ASTM D471 | 0.0 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 23°C,168hr,inEthanol,95% | ASTM D471 | 3.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inHydrochloricAcid,10% | ASTM D471 | -6.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inIsopropylAlcohol | ASTM D471 | 27 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inMethylethylketone | ASTM D471 | 43 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSodiumChloride,15% | ASTM D471 | -14 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSodiumHydroxide,50% | ASTM D471 | -5.0 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inSulfuricAcid,98% | ASTM D471 | -47 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 23°C,168hr,inTrichloroethylene | ASTM D471 | 56 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,inDeionizedWater | ASTM D471 | -18 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 100°C,168hr,inIRM903Oil | ASTM D471 | -57 % |
| Change rate of tensile strength in air | Change rate of tensile strength in air 125°C,70hr,inIRM903Oil | ASTM D471 | -61 % |
| Change rate of ultimate elongation in air | Change rate of ultimate elongation in air 125°C,168hr,inIRM903Oil | ASTM D471 | -70 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inAceticAcid,Break | ISO 1817 | -3.0 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inCyclohexane,Break | ISO 1817 | 63 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inDetergent(Tide),2.5%,Break | ISO 1817 | 0.0 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inEthanol,95%,Break | ISO 1817 | 3.0 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inHydrochloricAcid,10%,Break | ISO 1817 | 0.0 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inIsopropylAlcohol,Break | ISO 1817 | 53 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inMethylethylketone,Break | ISO 1817 | 80 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inTrichloroethylene,Break | ISO 1817 | 77 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inDetergent(Tide),2.5% | ASTM D471 | 2.0 |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inTrichloroethylene,Break | ISO 1817 | 77 % |
| Tensile stress change rate | Tensile stress change rate 100°C,168hr,inDeionizedWater,Break | ISO 1817 | -17 % |
| Tensile stress change rate | Tensile stress change rate 100°C,168hr,inIRM903Oil,Break | ISO 1817 | -63 % |
| Tensile stress change rate | Tensile stress change rate 125°C,70hr,inIRM903Oil,Break | ISO 1817 | -65 % |
| Tensile stress change rate | Tensile stress change rate 125°C,168hr,inIRM903Oil,Break | ISO 1817 | -70 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inAceticAcid | ASTM D471 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inAceticAcid | ASTM D471 | -1.0 |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inCyclohexane | ASTM D471 | -11 |
| Shore hardness | Shore hardness ShoreA,23°C,168hr,inTrichloroethylene | ISO 1817 | 1.0 |
| Shore hardness | Shore hardness ShoreA,100°C,168hr,inDeionizedWater | ISO 1817 | 0.0 |
| Shore hardness | Shore hardness ShoreA,100°C,168hr,inIRM903Oil | ISO 1817 | -26 |
| Shore hardness | Shore hardness ShoreA,125°C,168hr,inIRM903Oil | ISO 1817 | -30 |
| Quality change rate | Quality change rate 23°C,168hr,inAceticAcid | ASTM D471 | 6.9 % |
| Quality change rate | Quality change rate 23°C,168hr,inCyclohexane | ASTM D471 | -11 % |
| Quality change rate | Quality change rate 23°C,168hr,inDetergent(Tide),2.5% | ASTM D471 | 0.90 % |
| Quality change rate | Quality change rate 23°C,168hr,inEthanol,95% | ASTM D471 | 0.20 % |
| Quality change rate | Quality change rate 23°C,168hr,inHydrochloricAcid,10% | ASTM D471 | 0.20 % |
| Quality change rate | Quality change rate 23°C,168hr,inIsopropylAlcohol | ASTM D471 | -25 % |
| Quality change rate | Quality change rate 100°C,168hr,inIRM903Oil | ISO 1817 | 93 % |
| Quality change rate | Quality change rate 125°C,168hr,inIRM903Oil | ISO 1817 | 100 % |
| Volume change | Volume change 125°C,70hr,在IRM903油中 | ASTM D471 | 110 % |
| Volume change | Volume change 125°C,70hr,在IRM903油中 | ISO 1817 | 110 % |
| Tensile stress change rate | Tensile stress change rate 23°C,168hr,inSulfuricAcid,98%,Break | ISO 1817 | -10 % |
| Change rate of hardness (Shore) in the air | Change rate of hardness (Shore) in the air ShoreA,23°C,168hr,inEthanol,95% | ASTM D471 | 1.0 |