PP PRIME POLYPRO  J705UG PRIME POLYMER JAPAN

  • Đặc tính:
    Độ cứng cao
    Chống tĩnh điện
    Chống va đập cao

Bảng thông số kỹ thuật

otherĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
characteristic

characteristic

注塑 高抗冲. 抗静电. 高刚性
impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 17910 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

-20°C

ISO 1794.0 kJ/m²
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Rockwell hardness

Rockwell hardness

ASTM D78595
tensile strength

tensile strength

ASTM D638/ISO 52729 kg/cm²(MPa)[Lb/in²]
Tensile modulus

Tensile modulus

ASTM D638/ISO 5271450 kg/cm²(MPa)[Lb/in²]
Elongation at Break

Elongation at Break

ASTM D638/ISO 52750 %
Impact strength of cantilever beam gap

Impact strength of cantilever beam gap

ASTM D256/ISO 17910 kg·cm/cm(J/M)ft·lb/in
Rockwell hardness

Rockwell hardness

ISO 2039-295
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23℃

ISO 17910 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

-20℃

ISO 1794.0 kJ/m²
Tensile strain

Tensile strain

Break

ISO 527-250 %
Tensile stress

Tensile stress

Yield

ISO 527-229 Mpa
Tensile modulus

Tensile modulus

ISO 527-21450 Mpa
Tensile strain

Tensile strain

Break

ISO 527-250 %
tensile strength

tensile strength

Yield

ISO 527-229.0 Mpa
Tensile modulus

Tensile modulus

ISO 527-21450 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

HDT

ASTM D648/ISO 75105 ℃(℉)
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B105 °C
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B105 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
melt mass-flow rate

melt mass-flow rate

ASTM D1238/ISO 11339.0 g/10min
density

density

ASTM D792/ISO 11830.91
melt mass-flow rate

melt mass-flow rate

230℃,2.16kg

ISO 11339.0 g/10min
melt mass-flow rate

melt mass-flow rate

230°C/2.16kg

ISO 11339.0 g/10min
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Rockwell hardness

Rockwell hardness

ISO 2039-295
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.

Có thể bạn cũng quan tâm