ABS POLYLAC® PA-709 TAIWAN CHIMEI

370

Properties:
Chống va đập cao
Chịu nhiệt độ thấp
Usages:
Lĩnh vực ô tô
Certificates:
MSDS
RoHS
UL
TDS
TDS
UL
MSDS
RoHS
SVHC
Processing
Statement
REACH
TDS
Compare
View Prices

Technical Data Sheet

other	Test Condition	Test Result
remarks	remarks	在射出周期中勿将热融胶长期停留在加热管中
characteristic	characteristic	超高耐冲击强度押管用。
purpose	purpose	水管配件 / 汽车前后扰流板 / 摩托车挡板 / 押出水管 / 安全帽

other

Test Condition

Test Method

Test Result

remarks

在射出周期中勿将热融胶长期停留在加热管中

characteristic

超高耐冲击强度押管用。

purpose

水管配件 / 汽车前后扰流板 / 摩托车挡板 / 押出水管 / 安全帽

machinability	Test Condition	Test Method	Test Result
Dry conditions	Dry conditions		80°C下烘料约2-3小时
Processing temperature	Processing temperature		180-220 °C
	Processing temperature	Processing temperature		190-230 °C
	Processing temperature	Processing temperature	Processing temperature		180-230°C °C
Mold temperature	Mold temperature		30-70 °C

mechanical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	ASTM D256/ISO 179	37（6.9） kg·cm/cm(J/M)ft·lb/in
tensile strength	tensile strength	ASTM D638/ISO 527	400（5.670） kg/cm²(MPa)[Lb/in²]
elongation	elongation	ASTM D638/ISO 527	40 %
Rockwell hardness	Rockwell hardness	ASTM D785	R-102
Bending modulus	Bending modulus	ASTM D790/ISO 178	23000（32000） kg/cm²(MPa)[Lb/in²]
bending strength	bending strength	ASTM D790/ISO 178	640（9.070） kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	ASTM D256/ISO 179	45（8.4） kg·cm/cm(J/M)ft·lb/in

thermal performance	Test Condition	Test Method	Test Result
Combustibility (rate)	Combustibility (rate)	UL 94	1.6mmHB
Hot deformation temperature	Hot deformation temperature HDT	ASTM D648/ISO 75	99（210） ℃（℉）
Hot deformation temperature	Hot deformation temperature	Hot deformation temperature HDT	ASTM D648/ISO 75	88（190） ℃（℉）
Vicat softening temperature	Vicat softening temperature	ASTM D1525/ISO R306	105（221） ℃（℉）

Physical properties	Test Condition	Test Method	Test Result
density	density	ASTM D792/ISO 1183	1.03
melt mass-flow rate	melt mass-flow rate	ASTM D1238/ISO 1133	0.5 g/10min
melt mass-flow rate	melt mass-flow rate	ASTM D1238/ISO 1133	5 g/10min

Physical properties

Test Condition

Test Method

Test Result

density

ASTM D792/ISO 1183

1.03

melt mass-flow rate

ASTM D1238/ISO 1133

0.5 g/10min

melt mass-flow rate

ASTM D1238/ISO 1133

5 g/10min

IMPORTANT NOTES: vnplas.com collected the data in the data sheet from the material manufacturers. vnplas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

ABS POLYLAC® PA-709 TAIWAN CHIMEI

Technical Data Sheet

You May Like