PP Copolymer WELNEX™ RFG4VM Japan Polychem Corporation

Bảng thông số kỹ thuật

optical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
gloss

gloss

ASTM D52390
turbidity

turbidity

1000μm

ASTM D100325 %
impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

0°C

ISO 17915 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179无断裂
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

ISO 527-2320 MPa
tensile strength

tensile strength

Yield

ISO 527-212.0 MPa
Nominal tensile fracture strain

Nominal tensile fracture strain

ISO 527-2>500 %
Bending modulus

Bending modulus

ISO 178280 MPa
bending strength

bending strength

ISO 17812.0 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Vicat softening temperature

Vicat softening temperature

ISO 306115 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
density

density

ISO 11830.890 g/cm³
melt mass-flow rate

melt mass-flow rate

ISO 11336.0 g/10min
hardnessĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shore hardness

Shore hardness

ShoreD

ISO 86854
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.