PBT Crastin® SK605 BK851 DUPONT KOREA
- Đặc tính:Gia cố sợi thủy tinhĐóng gói: Gia cố sợi thủyTỷ lệ trọng lượng 30%)30% đóng gói theo trọng lSức mạnh tốtĐộ cứng tốt (gia cố sợi tTỷ lệ trọng lượng 30%)30% đóng gói theo trọng lSức mạnh tốtĐộ cứng tốt (gia cố sợi t
- Lĩnh vực ứng dụng:Linh kiện điện tửỨng dụng ô tôThành phần cấu trúcỨng dụng công nghiệpỨng dụng ô tôThành phần cấu trúcỨng dụng công nghiệpỨng dụng ô tô
- Giấy chứng nhận:UL
Bảng thông số kỹ thuật
| Other performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Extreme Oxygen Index | Extreme Oxygen Index | ASTM D2863 | 19 % |
| impact performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Charpy Notched Impact Strength | Charpy Notched Impact Strength -40°C | ISO 179/1eA | 10 kJ/m² |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength -30°C | ISO 179/1eA | 11 kJ/m² |
| Charpy Notched Impact Strength | Charpy Notched Impact Strength 23°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch -40°C | ISO 179/1eU | 75 kJ/m² |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch -30°C | ISO 179/1eU | 75 kJ/m² |
| Impact strength of simply supported beam without notch | Impact strength of simply supported beam without notch 23°C | ISO 179/1eU | 70 kJ/m² |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -30°C | ISO 180/1A | 10 kJ/m² |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength -40°C | ISO 180/1U | 55 kJ/m² |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength -30°C | ISO 180/1U | 55 kJ/m² |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength 23°C | ISO 180/1U | 60 kJ/m² |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23°C | ISO 180/1A | 11 kJ/m² |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40°C | ISO 180/1A | 10 kJ/m² |
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Burning rate | Burning rate 1.00mm | ISO 3795 | 41 mm/min |
| UL flame retardant rating | UL flame retardant rating 0.75mm | UL 94 | HB |
| UL flame retardant rating | UL flame retardant rating 1.5mm | UL 94 | HB |
| UL flame retardant rating | UL flame retardant rating 0.75mm | IEC 60695-11-10,-20 | HB |
| UL flame retardant rating | UL flame retardant rating 1.5mm | IEC 60695-11-10,-20 | HB |
| Extreme Oxygen Index | Extreme Oxygen Index | ISO 4589-2 | 19 % |
| FMVSS flammability | FMVSS flammability | FMVSS302 | B |
| Atomization | Atomization refraction,F值 | ISO 6452 | 99 % |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| compressive strength | compressive strength 5 mm/min, 3.20 mm, 23 ℃ | ASTM D695 | 202 MPa |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength 23℃ | ASTM D256 | 998 J/m |
| Suspended wall beam without notch impact strength | Suspended wall beam without notch impact strength -40℃ | ASTM D256 | 1120 J/m |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap 23℃ | ASTM D256 | 112 J/m |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap -40℃ | ASTM D256 | 101 J/m |
| Impact strength of cantilever beam gap | Impact strength of cantilever beam gap | ASTM D256 | 101 J/m |
| Elongation at Break | Elongation at Break 23℃ | ASTM D638 | 2.6 % |
| Bending modulus | Bending modulus 23℃ | ASTM D790 | 8970 MPa |
| Tensile modulus | Tensile modulus 23℃ | ASTM D638 | 10000 MPa |
| tensile strength | tensile strength 23℃ | ASTM D638 | 140 MPa |
| Tensile creep modulus | Tensile creep modulus 1000hr | ISO 899-1 | 6600 Mpa |
| Bending modulus | Bending modulus | ISO 178 | 9000 Mpa |
| bending strength | bending strength | ISO 178 | 200 Mpa |
| Tensile modulus | Tensile modulus | ISO 527-2 | 10000 Mpa |
| tensile strength | tensile strength Break | ISO 527-2 | 140 Mpa |
| Tensile strain | Tensile strain Break | ISO 527-2 | 2.7 % |
| Tensile creep modulus | Tensile creep modulus 1hr | ISO 899-1 | 9000 Mpa |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| UL flame retardant rating | UL flame retardant rating 3.00 mm | UL 94 | HB |
| UL flame retardant rating | UL flame retardant rating 1.50 mm | UL 94 | HB |
| UL flame retardant rating | UL flame retardant rating 0.750 mm | UL 94 | HB |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion 垂直Flow,73 to 130°F (23 to 55℃) | ASTM E831 | 0.000090 cm/cm/℃ |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion 平行Flow,73 to 130°F (23 to 55℃) | ASTM E831 | 0.000030 cm/cm/℃ |
| Hot deformation temperature | Hot deformation temperature 1.8Mpa,Unannealed | ASTM D648 | 205 ℃ |
| Hot deformation temperature | Hot deformation temperature 0.45Mpa,Unannealed | ASTM D648 | 220 ℃ |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion TD | ISO 11359-2 | 9E-05 cm/cm/°C |
| Hot deformation temperature | Hot deformation temperature 1.8MPa,Unannealed | ISO 75-2/A | 205 °C |
| Hot deformation temperature | Hot deformation temperature 0.45MPa,Unannealed | ISO 75-2/B | 220 °C |
| Melting temperature | Melting temperature | ISO 11357-3 | 224 °C |
| Linear coefficient of thermal expansion | Linear coefficient of thermal expansion MD | ISO 11359-2 | 3E-05 cm/cm/°C |
| Vicat softening temperature | Vicat softening temperature | ISO 306/B50 | 215 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| melt mass-flow rate | melt mass-flow rate | ISO 1133 | 10 g/10min |
| density | density | ISO 1183 | 1.53 g/cm³ |
| density | density | ASTM D792 | 1.53 |
| Melt Volume Flow Rate (MVR) | Melt Volume Flow Rate (MVR) 250°C/2.16kg | ISO 1133 | 7.00 cm3/10min |
| Shrinkage rate | Shrinkage rate TD | ISO 294-4 | 1.1 % |
| Shrinkage rate | Shrinkage rate MD | ISO 294-4 | 0.30 % |
| Water absorption rate | Water absorption rate Saturation,23°C,2.00mm | ISO 62 | 0.35 % |
| Water absorption rate | Water absorption rate Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.15 % |
| Stickiness | Stickiness | ISO 307 | 100 cm³/g |
| MediumDensity | MediumDensity | 1.36 g/cm³ | |
| Top out temperature | Top out temperature | 170 °C | |
| SpecificHeatCapacity of Melt | SpecificHeatCapacity of Melt | 1730 J/kg/°C | |
| ThermalConductivityofMelt | ThermalConductivityofMelt | 0.28 W/m/K |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| Dielectric strength | Dielectric strength | IEC 60243-1 | 38 KV/mm |
| Volume resistivity | Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
| Surface resistivity | Surface resistivity | IEC 60093 | >1.0E+15 ohms |
| Relative permittivity | Relative permittivity 100Hz | IEC 60250 | 3.90 |
| Relative permittivity | Relative permittivity 1MHz | IEC 60250 | 3.80 |
| Dissipation factor | Dissipation factor 100Hz | IEC 60250 | 7.5E-04 |
| Dissipation factor | Dissipation factor 1MHz | IEC 60250 | 0.018 |
| Compared to the anti leakage trace index | Compared to the anti leakage trace index | IEC 60112 | PLC 1 |
| Supplementary Information | Điều kiện kiểm tra | Phương pháp kiểm tra | Kết quả kiểm tra |
|---|---|---|---|
| EmissionofOrganicCompounds | EmissionofOrganicCompounds | VDA277 | 140 µgC/g |
| Odor | Odor | VDA270 | 3.00 |