PA6 C216-V15 SOLVAY SHANGHAI

  • Đặc tính:
    Gia cố sợi thủy tinh
  • Lĩnh vực ứng dụng:
    Lĩnh vực ô tô
    Lĩnh vực điện tử
    Lĩnh vực điện

Bảng thông số kỹ thuật

mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

---

ISO 5276100 Mpa
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

---

ISO 179-199342 kJ/m²
Elongation at Break

Elongation at Break

---

ISO 527120 Mpa
Charpy Notched Impact Strength

Charpy Notched Impact Strength

---

ISO 179-19935.5 kJ/m²
Elongation at Break

Elongation at Break

---

ISO 5274 %
Impact strength of cantilever beam gap

Impact strength of cantilever beam gap

---

ISO 1805 kJ/m²
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

23℃-85℃

ISO 75-24.2 E-5/℃
Melting temperature

Melting temperature

---

ISO 3146C222 °C
Glow wire combustion index (GWFI)

Glow wire combustion index (GWFI)

1.6mm

IEC 695-2-1650 °C
Combustibility

Combustibility

1.6mm

ISO 1210UL 94HB V
Hot deformation temperature

Hot deformation temperature

1.8MPa

ISO 179-1993180 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Water absorption rate

Water absorption rate

在23℃,24hr

ISO 621.15 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Dielectric loss

Dielectric loss

1MHz

IEC 2500.02 ---
Dielectric constant

Dielectric constant

1MHz

IEC 2503.8 ---
Surface resistivity

Surface resistivity

---

IEC 930.1 E14.ohm
Compared to the Leakage Traceability Index (CTI)

Compared to the Leakage Traceability Index (CTI)

---

IEC 112550 V
Volume resistivity

Volume resistivity

---

IEC 9310 E14.ohm.cm
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.