PA6 TEREZ PA 6 8950 T TER HELL PLASTIC GMBH

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Charpy Notched Impact Strength

Charpy Notched Impact Strength

-30°C

ISO 179/1eA15 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23°C

ISO 179/1eA80 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179/1eU无断裂
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

ISO 527-22100 MPa
Tensile strain

Tensile strain

Yield

ISO 527-25.0 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B130 °C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A50.0 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
density

density

ISO 11831.07 g/cm³
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Volume resistivity

Volume resistivity

IEC 600931E+15 ohms·cm
Compared to the anti leakage trace index

Compared to the anti leakage trace index

IEC 60112PLC 1
Surface resistivity

Surface resistivity

IEC 600931E+14 ohms
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.