PBT/ASA POLYFORT® A3GF20 A SCHULMAN USA

  • Đặc tính:
    Thấp cong cong
    Bề mặt hoàn thiện tốt
    Đóng gói: Gia cố sợi thủy
    20% đóng gói theo trọng l

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

-30°C

ISO 179/1eU30 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179/1eU45 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Burning wire flammability index

Burning wire flammability index

1.5mm

IEC 60695-2-12700 °C
Flammability level

Flammability level

3.0mm

IEC 60695-11-10,-20HB
Flammability level

Flammability level

1.5mm

IEC 60695-11-10,-20HB
Burning rate

Burning rate

2.00mm

ISO 379520 mm/min
Hot filament ignition temperature

Hot filament ignition temperature

3.0mm

IEC 60695-2-13725 °C
Hot filament ignition temperature

Hot filament ignition temperature

1.5mm

IEC 60695-2-13725 °C
Burning wire flammability index

Burning wire flammability index

3.0mm

IEC 60695-2-12700 °C
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile strain

Tensile strain

Break

ISO 527-2/1A/52.6 %
tensile strength

tensile strength

Break

ISO 527-2/1A/596.0 Mpa
Tensile modulus

Tensile modulus

ISO 527-2/1A/16500 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Vicat softening temperature

Vicat softening temperature

--

ISO 306/B50145 °C
Vicat softening temperature

Vicat softening temperature

--

ISO 306/A50205 °C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/Af172 °C
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/Bf210 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

250°C/2.16kg

ISO 113320.0 cm3/10min
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Compared to the anti leakage trace index

Compared to the anti leakage trace index

SolutionA

IEC 60112 V
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.

Có thể bạn cũng quan tâm