PP INNOPOL® PP CS 1-3000 DEL INNO-COMP HUNGARY

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Charpy Notched Impact Strength

Charpy Notched Impact Strength

-30°C

ISO 179/1eA1.2 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23°C

ISO 179/1eA3.7 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

-30°C

ISO 179/1eU17 kJ/m²
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179/1eU无断裂
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

1.6mm

FMVSS302HB
UL flame retardant rating

UL flame retardant rating

1mm

FMVSS302+
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

ISO 527-2/11450 MPa
tensile strength

tensile strength

Yield

ISO 527-2/5036.0 MPa
Tensile strain

Tensile strain

Yield

ISO 527-2/508.0 %
Nominal tensile fracture strain

Nominal tensile fracture strain

ISO 527-214 %
Bending modulus

Bending modulus

ISO 1782600 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A54.0 °C
Vicat softening temperature

Vicat softening temperature

--

ISO 306/A120153 °C
Vicat softening temperature

Vicat softening temperature

--

ISO 306/B12094.0 °C
Melting temperature

Melting temperature

ISO 11357-3162 °C
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B101 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Shrinkage rate

Shrinkage rate

MD

ISO 294-41.2 %
density

density

23°C

ISO 11830.920 g/cm³
melt mass-flow rate

melt mass-flow rate

230°C/2.16kg

ISO 11337.0 g/10min
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

230°C/2.16kg

ISO 113310.0 cm³/10min
Shrinkage rate

Shrinkage rate

TD

ISO 294-40.96 %
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.