PC/ASA WR 5 A SCHULMAN USA

  • Đặc tính:
    Chống va đập cao
    Dòng chảy cao
    Thời tiết kháng

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

-30°C

ISO 179/1eUNoBreak
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179/1eUNoBreak
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Tensile modulus

Tensile modulus

ISO 527-2/1A/11800 Mpa
tensile strength

tensile strength

Yield

ISO 527-2/1A/5042.0 Mpa
tensile strength

tensile strength

Break

ISO 527-2/1A/539.0 Mpa
Tensile strain

Tensile strain

Yield

ISO 527-2/1A/504.4 %
Tensile strain

Tensile strain

Break

ISO 527-2/1A/578 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/Bf112 °C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/Af88.0 °C
Vicat softening temperature

Vicat softening temperature

ISO 306/B50111 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

260°C/5.0kg

ISO 113330.0 cm3/10min
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.

Có thể bạn cũng quan tâm