PARA Reny® 2502AH Mitsubishi Chemical Corporation

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 17927 kJ/m²
Charpy Notched Impact Strength

Charpy Notched Impact Strength

23°C

ISO 1794.1 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
UL flame retardant rating

UL flame retardant rating

1.6mm

UL 94V-0
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
bending strength

bending strength

ISO 178249 MPa
Bending modulus

Bending modulus

ISO 17816500 MPa
Tensile strain

Tensile strain

Break

ISO 527-21.2 %
tensile strength

tensile strength

Break

ISO 527-2150 MPa
Tensile modulus

Tensile modulus

ISO 527-218400 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B235 °C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A217 °C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

TD

ISO 11359-23E-05 cm/cm/°C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

MD

ISO 11359-22E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Water absorption rate

Water absorption rate

Equilibrium,23°C,50%RH

ISO 620.90 %
Water absorption rate

Water absorption rate

Saturation,23°C

ISO 620.18 %
Shrinkage rate

Shrinkage rate

0.49 %
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

275°C/2.16kg

ISO 113314.0 cm³/10min
melt mass-flow rate

melt mass-flow rate

275°C/2.16kg

ISO 113322 g/10min
density

density

ISO 11831.66 g/cm³
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Compared to the anti leakage trace index

Compared to the anti leakage trace index

IEC 60112PLC 3
Volume resistivity

Volume resistivity

IEC 600932E+16 ohms·cm
Surface resistivity

Surface resistivity

IEC 600935E+15 ohms
Dissipation factor

Dissipation factor

1MHz

IEC 60250--
Dissipation factor

Dissipation factor

100Hz

IEC 60250--
Relative permittivity

Relative permittivity

1MHz

IEC 60250--
Relative permittivity

Relative permittivity

100Hz

IEC 60250--
Dielectric strength

Dielectric strength

2.00mm

IEC 60243-121 kV/mm
Dielectric strength

Dielectric strength

1.00mm

IEC 60243-127 kV/mm
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.