PC IUPILON™  H-2000R MITSUBISHI THAILAND

  • Đặc tính:
    Dòng chảy cao
  • Lĩnh vực ứng dụng:
    Lĩnh vực ô tô
    Bao bì y tế
    Lĩnh vực điện tử
    Lĩnh vực điện
  • Giấy chứng nhận:
    UL
    UL

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179NoBreak
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Bending modulus

Bending modulus

ISO 1782300 Mpa
bending strength

bending strength

ISO 17893.0 Mpa
Tensile modulus

Tensile modulus

ISO 527-22400 Mpa
tensile strength

tensile strength

Yield

ISO 527-262.0 Mpa
Tensile strain

Tensile strain

Yield

ISO 527-26.6 %
Nominal tensile fracture strain

Nominal tensile fracture strain

ISO 527-2120 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

0.45MPa,Unannealed

ISO 75-2/B138 °C
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A124 °C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

MD

ISO 11359-26.5E-05 cm/cm/°C
Linear coefficient of thermal expansion

Linear coefficient of thermal expansion

TD

ISO 11359-26.6E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
melt mass-flow rate

melt mass-flow rate

300°C/1.2kg

ISO 113322 g/10min
Melt Volume Flow Rate (MVR)

Melt Volume Flow Rate (MVR)

300°C/1.2kg

ISO 113320.0 cm3/10min
Shrinkage rate

Shrinkage rate

TD:3.20mm

0.50-0.70 %
Shrinkage rate

Shrinkage rate

MD:3.20mm

0.50-0.70 %
Shrinkage rate

Shrinkage rate

吸水率(Saturation,23°C)

0.24 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Surface resistivity

Surface resistivity

IEC 600936E+15 ohms
Volume resistivity

Volume resistivity

IEC 600933E+16 ohms·cm
Dielectric strength

Dielectric strength

1.00mm

IEC 60243-131 KV/mm
Dielectric strength

Dielectric strength

3.00mm

IEC 60243-118 KV/mm
Relative permittivity

Relative permittivity

100Hz

IEC 602503.10
Relative permittivity

Relative permittivity

1MHz

IEC 602503.10
Dissipation factor

Dissipation factor

100Hz

IEC 602506E-04
Dissipation factor

Dissipation factor

1MHz

IEC 602509E-03
Compared to the anti leakage trace index

Compared to the anti leakage trace index

CTI

UL 746PLC 2
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.