PPS LUVOCOM® 1301-8568/BL LEHVOSS Group

Bảng thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Impact strength of simply supported beam without notch

Impact strength of simply supported beam without notch

23°C

ISO 179/1eU40 kJ/m²
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
tensile strength

tensile strength

Break

ISO 527-2100 MPa
Tensile strain

Tensile strain

Yield

ISO 527-23.0 %
Bending modulus

Bending modulus

ISO 1784000 MPa
Tensile modulus

Tensile modulus

ISO 527-25000 MPa
bending strength

bending strength

ISO 178145 MPa
Bending strain

Bending strain

ISO 1784.0 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
Hot deformation temperature

Hot deformation temperature

1.8MPa,Unannealed

ISO 75-2/A250 °C
Continuous use temperature

Continuous use temperature

UL 746B220 °C
Maximum operating temperature

Maximum operating temperature

ShortTerm

240 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
density

density

ISO 11831.40 g/cm³
Shrinkage rate

Shrinkage rate

DIN 169010.40to0.80 %
Water absorption rate

Water absorption rate

23°C,24hr

<0.050 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traKết quả kiểm tra
insulation resistance

insulation resistance

IEC 60167>1.0E+12 ohms
Tuyên bố miễn trừ trách nhiệm: Các dữ liệu cung cấp trên website được vnplas.com thu thập từ nhà sản xuất nguyên vật liệu và các nhà cung cấp trung gian. Vnplas.com đã nỗ lực hết sức để đảm bảo tính chính xác của dữ liệu này. Tuy nhiên, chúng tôi không chịu bất kỳ trách nhiệm nào về dữ liệu và khuyến nghị quý doanh nghiệp xác minh dữ liệu với các nhà cung cấp trước khi đưa ra quyết định cuối cùng.