So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

PPO(PPE) Iupiace® AP6GM4 Mitsubishi Chemical Corporation

--

--

--

- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
Charpy Notched Impact Strength23°CISO 1796.0 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
UL flame retardant rating1.5mmUL 94V-1
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
Tensile modulus23°CISO 527-25700 MPa
Bending modulus23°CISO 1785500 MPa
Tensile strainBreak,23°CISO 527-22.7 %
tensile strengthBreak,23°CISO 527-280.0 MPa
bending strength23°CISO 178132 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A115 °C
Linear coefficient of thermal expansionTDISO 11359-26.8E-05 cm/cm/°C
MDISO 11359-23.7E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
densityISO 11831.23 g/cm³
Melt Volume Flow Rate (MVR)280°C/5.0kgISO 113331.0 cm³/10min
Shrinkage rateMD:3.20mm0.20to0.40 %
TD:3.20mm0.30to0.50 %
Water absorption rateSaturation,23°CISO 620.060 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupiace® AP6GM4
Dissipation factor1MHzIEC 602506.7E-03
Dielectric strength1.00mmIEC 60243-135 kV/mm
Volume resistivityIEC 600935E+15 ohms·cm
Compared to the anti leakage trace indexIEC 60112PLC 3
Relative permittivity100HzIEC 602503.20
Dissipation factor100HzIEC 602505.7E-03
Dielectric strength3.00mmIEC 60243-118 kV/mm
Surface resistivityIEC 600931E+15 ohms
Relative permittivity1MHzIEC 602503.10