So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC 9KF23500 HI 4Plas
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
Impact strength of cantilever beam gap-20°CISO 180/1A8.0 kJ/m²
23°CISO 180/1A12 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
flammabilityĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Hot filament ignition temperature2.0mmIEC 60695-2-13960 °C
UL flame retardant rating3.2mmUL 94V-0
1.6mmUL 94V-0
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Tensile strainBreak,23°CISO 527-2/520 %
Tensile modulus23°CISO 527-2/52100 MPa
tensile strengthBreak,23°CISO 527-2/545.0 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B130 °C
Vicat softening temperatureISO 306/B160 °C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A60.0 °C
Melting temperatureDSC220to230 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Water absorption rateEquilibrium,23°C,50%RHISO 620.10 %
water contentISO 960<1000 ppm
densityISO 11831.34 g/cm³
melt mass-flow rate270°C/2.16kgISO 113360 g/10min
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9KF23500 HI
Volume resistivityIEC 600931E+15 ohms·cm
Compared to the anti leakage trace indexIEC 60112PLC 2
Surface resistivityIEC 600931E+15 ohms