So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

PC Iupilon® GSH2010PH Mitsubishi Chemical Corporation

--

--

--

- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
Charpy Notched Impact Strength23°CISO 17910 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179NoBreak
flammabilityĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
UL flame retardant rating0.40mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
Nominal tensile fracture strainISO 527-210 %
bending strengthISO 17890.0 MPa
tensile strengthYieldISO 527-252.0 MPa
Tensile strainYieldISO 527-25.0 %
Tensile modulusISO 527-22900 MPa
Bending modulusISO 1782700 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B132 °C
1.8MPa,UnannealedISO 75-2/A125 °C
Linear coefficient of thermal expansionTDISO 11359-25.8E-05 cm/cm/°C
MDISO 11359-25.8E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
melt mass-flow rate300°C/1.2kgISO 113315 g/10min
Shrinkage rate吸水率(Saturation,23°C)0.14 %
densityISO 11831.26 g/cm³
Shrinkage rateMD:3.20mm0.30to0.50 %
TD:3.20mm0.30to0.50 %
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 113314.0 cm³/10min
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traMitsubishi Chemical Corporation/Iupilon® GSH2010PH
Compared to the anti leakage trace indexCTIUL 746PLC 3