So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC EXL1414T SABIC INNOVATIVE US
LEXAN™ 
Lĩnh vực điện,Lĩnh vực điện tử,Thiết bị gia dụng,Thiết bị gia dụng,Nắp chai
Chịu nhiệt độ thấp,Trong suốt,Dễ dàng xử lý,Thanh khoản trung bình,Độ dẻo,Đồng trùng hợp

Giá nội địa

Miền Nam Việt Nam (xung quanh Hồ Chí Minh)

₫ 127.010/KG

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

optical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
transmissivity2540 μmASTM D100382.0 %
turbidity2540 μmASTM D10033.0 %
impact performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
Dart impact-30°C, Total EnergyASTM D376377.0 J
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Charpy Notched Impact Strength23°CISO 179/1eA70 kJ/m²
Dart impact23°C, Total EnergyASTM D376375.0 J
Charpy Notched Impact Strength-30°CISO 179/1eA60 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
UL flame retardant rating3.0 mmUL 94V-2
Hot filament ignition temperature0.8 mmIEC 60695-2-13850 °C
3.0 mmIEC 60695-2-13850 °C
Burning wire flammability index3.0 mmIEC 60695-2-12960 °C
UL flame retardant rating0.8 mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
elongationYieldISO 527-2/505.4 %
Bending modulus--5ISO 1782120 Mpa
elongationYield3ASTM D6385.6 %
Tensile modulus--2ASTM D6382180 Mpa
tensile strengthYieldISO 527-2/5056.0 Mpa
BreakISO 527-2/5055.0 Mpa
Tensile modulus--ISO 527-2/12300 Mpa
bending strengthYield, 50.0 mm Span4ASTM D79092.0 Mpa
Bending modulus50.0 mm Span4ASTM D7902180 Mpa
tensile strengthBreak3ASTM D63859.0 Mpa
bending strength--5,6ISO 17888.0 Mpa
elongationBreak3ASTM D638120 %
tensile strengthYield3ASTM D63857.0 Mpa
elongationBreakISO 527-2/50110 %
injectionĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
Suggested maximum moisture content0.020 %
Mold temperature70 to 95 °C
Processing (melt) temperature295 to 315 °C
drying temperature120 °C
Suggested injection volume40 to 60 %
drying time3.0 to 4.0 hr
Screw speed40 to 70 rpm
Temperature in the middle of the barrel280 to 305 °C
Temperature at the rear of the barrel270 to 295 °C
Exhaust hole depth0.025 to 0.076 mm
Temperature at the front of the material cylinder295 to 315 °C
Back pressure0.300 to 0.700 Mpa
Spray nozzle temperature290 to 310 °C
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
RTI ElecUL 746130 °C
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648120 °C
Vicat softening temperature--ISO 306/B120139 °C
Hot deformation temperature1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span9ISO 75-2/Af116 °C
Vicat softening temperature--ASTM D152510138 °C
Ball Pressure Test123 to 127°CIEC 60695-10-2通过
RTIUL 746130 °C
Linear coefficient of thermal expansionAcross Flow : -40 to 95°CASTM E8318.0E-5 cm/cm/°C
Flow : 23 to 80°CISO 11359-26.7E-5 cm/cm/°C
Flow : -40 to 95°CASTM E8316.7E-5 cm/cm/°C
Across Flow : 23 to 80°CISO 11359-28.0E-5 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
melt mass-flow rate300°C/1.2 kgASTM D123810 g/10 min
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method0.40 - 0.80 %
Flow : 3.20 mmInternal Method0.40 - 0.80 %
Water absorption rateSaturation, 23°CISO 620.12 %
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 11339.00 cm3/10min
Water absorption rateEquilibrium, 23°C, 50% RHISO 620.090 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
Volume resistivityASTM D257> 1.0E+15 ohms·cm
Surface resistivityASTM D257> 1.0E+15 ohms
hardnessĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/EXL1414T
Rockwell hardnessL -SaleISO 2039-287