So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

PPO SE1X 701 SABIC INNOVATIVE JAPAN

NORYL™ 

Linh kiện điện tử,Bộ phận cơ khí Shield,Trang chủ

Chịu nhiệt độ cao,Chống thủy phân

CIF

Saigon Port

$ 4,242/MT

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
Dart impact-30°C, Energy at PeakASTM D376332.0 J
23°C, Energy at PeakASTM D376351.0 J
flammabilityĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
UL flame retardant rating6.0 mmUL 94V-0
1.5 mmUL 94V-1
Radiation board gradeRP100
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
tensile strengthYieldASTM D63867.0 Mpa
BreakASTM D63853.0 Mpa
Bending modulus100 mm SpanASTM D7902500 Mpa
elongationYieldASTM D6388.1 %
bending strengthYield, 100 mm SpanASTM D790102 Mpa
elongationBreakASTM D63820 %
injectionĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
drying time3.0 to 4.0 hr
Screw speed20 to 100 rpm
Suggested maximum moisture content0.020 %
Temperature in the middle of the barrel260 to 305 °C
Mold temperature75 to 105 °C
Temperature at the rear of the barrel250 to 300 °C
Processing (melt) temperature280 to 310 °C
drying temperature105 to 110 °C
Suggested injection volume30 to 70 %
Temperature at the front of the material cylinder270 to 310 °C
Back pressure0.300 to 0.700 Mpa
Spray nozzle temperature280 to 310 °C
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
RTI ElecUL 746110 °C
RTI ImpUL 746105 °C
Hot deformation temperature0.45 MPa, Unannealed, 6.40 mmASTM D648126 °C
RTIUL 746110 °C
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mmASTM D648117 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
Water absorption rate24 hrASTM D5700.060 %
Outdoor applicabilityUL 746Cf1
Shrinkage rateFlow : 3.20 mmInternal Method0.50 - 0.70 %
Across FlowFlow 2Internal Method0.50 - 0.70 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE JAPAN/SE1X 701
Arc resistanceASTM D495PLC 6
Volume resistivityASTM D2572.3E+16 ohms·cm
Dissipation factor1 MHzASTM D1502.1E-3
High voltage arc tracing rateUL 746PLC 4
Dissipation factor60 HzASTM D1503.4E-3
Surface resistivityASTM D257> 1.0E+15 ohms
Dielectric constant1 MHzASTM D1502.46
Dielectric strength3.20 mm, in OilASTM D14918 KV/mm
Compared to the anti leakage trace indexUL 746PLC 1
Dissipation factor50 HzASTM D1503.4E-3
Dielectric constant50 kHzASTM D1502.52
60 HzASTM D1502.52