So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
LLDPE CA3817 Cabot Corporation
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traCabot Corporation/ CA3817
Tear resistance of pants typeMD : 50 μmASTM D1938106 N/mm
elongationTD : Break, 100 μm940 %
tensile strengthMD : 100 μm25.1 MPa
elongationMD : Break, 100 μmISO 527-3/5001100 %
Tear resistance of pants typeTD : 50 μm104 N/mm
tensile strengthTD : 100 μm22.4 MPa
Bending modulusCompression MoldedISO 178284 MPa
tensile strengthMD : Yield, 100 μmISO 527-3/50011.8 MPa
TD : Yield, 100 μm11.5 MPa
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traCabot Corporation/ CA3817
densityInternal Method1.04 g/cm3
melt mass-flow rate190°C/5.0kgISO 11332.0 g/10min
190°C/10.0 kgISO 11336.0 g/10 min
190°C/21.6 kg2.0 g/10 min
190°C/10.0kgISO 11336.0 g/10min
Bending modulusCompression MoldedISO 178284 MPa
density23°CInternal Method1.04 g/cm³
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traCabot Corporation/ CA3817
Surface resistivity0.100mmInternal Method1E+04 ohms
0.100 mmInternal Method1E+04 ohm
filmĐiều kiện kiểm traPhương pháp kiểm traCabot Corporation/ CA3817
tensile strengthMD:Yield,100μmISO 527-3/50011.8 MPa
TD:Break,100μmISO 527-3/50022.4 MPa
elongationTD:Break,100μmISO 527-3/500940 %
tensile strengthTD:Yield,100μmISO 527-3/50011.5 MPa
MD:Break,100μmISO 527-3/50025.1 MPa
Tear resistance of pants typeMD:50μmASTM D1938106 N/mm
elongationMD:Break,100μmISO 527-3/5001100 %
Tear resistance of pants typeTD:50μmASTM D1938104 N/mm