So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC EXL9330-BK1A068 SABIC INNOVATIVE SINGAPHORE
LEXAN™ 
Thực phẩm,Sản phẩm tường mỏng,Trang chủ
Chống cháy,Tăng cường,Chống tia cực tím

Giá nội địa

Miền Nam Việt Nam (xung quanh Hồ Chí Minh)

₫ 179.770/KG

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
Charpy Notched Impact Strength23°CISO 179/1eA75 kJ/m²
Dart impact23°C, Total EnergyASTM D376352.0 J
Impact strength of cantilever beam gap23°C10ISO 180/4A80 kJ/m²
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
Impact strength of cantilever beam gap23°C9ISO 180/1A70 kJ/m²
-30°C9ISO 180/1A55 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Impact strength of cantilever beam gap23°C8Internal Method1100 J/m
23°C, 6.40 mmASTM D256640 J/m
23°CASTM D256800 J/m
Charpy Notched Impact Strength-30°CISO 179/1eA60 kJ/m²
Impact strength of cantilever beam gap-50°CASTM D256590 J/m
-30°CASTM D256680 J/m
-30°C10ISO 180/4A65 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
UL flame retardant rating3.0 mmUL 945VA
Extreme Oxygen IndexISO 4589-235 %
Hot filament ignition temperature1.0 mmIEC 60695-2-13825 °C
UL flame retardant rating1.5 mmUL 94V-0
Burning wire flammability index1.0 mmIEC 60695-2-12960 °C
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
elongationYieldISO 527-2/506.0 %
Tensile modulus--2ASTM D6382100 Mpa
elongationYield3ASTM D6386.0 %
Bending modulus--5ISO 1782200 Mpa
tensile strengthYieldISO 527-2/5055.0 Mpa
Tensile modulus--ISO 527-2/12100 Mpa
tensile strengthBreakISO 527-2/5060.0 Mpa
bending strengthYield, 50.0 mm Span4ASTM D79088.0 Mpa
tensile strengthBreak3ASTM D63861.0 Mpa
Bending modulus50.0 mm Span4ASTM D7902060 Mpa
bending strength--5,6ISO 17885.0 Mpa
elongationBreak3ASTM D638130 %
tensile strengthYield3ASTM D63858.0 Mpa
elongationBreakISO 527-2/50130 %
injectionĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
Suggested maximum moisture content0.020 %
Mold temperature70 to 95 °C
Processing (melt) temperature295 to 315 °C
drying temperature120 °C
Suggested injection volume40 to 60 %
drying time3.0 to 4.0 hr
Screw speed40 to 70 rpm
Temperature in the middle of the barrel280 to 305 °C
Temperature at the rear of the barrel215 to 295 °C
Exhaust hole depth0.025 to 0.076 mm
Temperature at the front of the material cylinder295 to 315 °C
Back pressure0.300 to 0.700 Mpa
Spray nozzle temperature290 to 310 °C
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
RTI ElecUL 746125 °C
Hot deformation temperature0.45 MPa, Unannealed, 3.20 mmASTM D648134 °C
Vicat softening temperature--ASTM D152512142 °C
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648120 °C
Vicat softening temperature--ISO 306/B50140 °C
RTIUL 746120 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 80°CISO 11359-27.7E-5 cm/cm/°C
Flow : -40 to 40°CASTM E8316.7E-5 cm/cm/°C
Hot deformation temperature0.45 MPa, Unannealed, 4.00 mm, 100 mm Span11ISO 75-2/Be135 °C
1.8 MPa, Unannealed, 4.00 mm, 100 mm Span11ISO 75-2/Ae124 °C
RTI ImpUL 746115 °C
Ball Pressure Test123 to 127°CIEC 60695-10-2通过
Linear coefficient of thermal expansionAcross Flow : -40 to 40°CASTM E8316.7E-5 cm/cm/°C
Flow : 23 to 80°CISO 11359-27.2E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mmASTM D648124 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
melt mass-flow rate300°C/1.2 kgASTM D123810 g/10 min
Outdoor applicabilityUL 746Cf1
density--ISO 11831.19 g/cm³
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method0.40 - 0.80 %
Flow : 3.20 mmInternal Method0.40 - 0.80 %
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 11339.00 cm3/10min
Water absorption rateSaturation, 23°CISO 620.35 %
density--ASTM D7921.18 g/cm³
Water absorption rateEquilibrium, 23°C, 50% RHISO 620.15 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
Dissipation factor1 MHzASTM D1508.5E-3
60 HzASTM D1502.4E-3
50 HzIEC 602501.0E-3
Dielectric strength3.20 mm, in OilASTM D14917 KV/mm
Compared to the anti leakage trace indexUL 746PLC 3
High arc combustion indexUL 746PLC 0
Dielectric constant50 HzIEC 602502.60
50 kHzASTM D1502.95
Dissipation factor60 HzIEC 602501.0E-3
Dielectric strength3.20 mm, in OilIEC 60243-116 KV/mm
Dielectric constant60 HzASTM D1502.95
Hot wire ignitionUL 746PLC 1
Dielectric constant1 MHzIEC 602502.70
Volume resistivityIEC 60093> 1.0E+15 ohms·cm
Dielectric constant1 MHzASTM D1502.90
Compared to the anti leakage trace indexIEC 60112PLC 3
Dielectric constant60 HzIEC 602502.60
Dissipation factor50 HzASTM D1502.4E-3
Surface resistivityIEC 60093> 1.0E+15 ohms
hardnessĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE SINGAPHORE/EXL9330-BK1A068
Ball Pressure TestH 358/30ISO 2039-190.0 Mpa