So sánh vật liệu
Thông số kỹ thuật
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | EMPILON/EMPILON® 355 |
|---|---|---|---|
| tensile strength | ASTM D412 | 1.77 MPa | |
| 300%Strain | ASTM D412 | 1.18 MPa | |
| Permanent compression deformation | 23°C,70hr | ASTM D395 | 25 % |
| elongation | Break | ASTM D412 | 300 % |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Brittle temperature | -55.0 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Shrinkage rate | TD | 0.90 % | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 10 g/10min |
| Shrinkage rate | MD | 0.70 % | |
| density | ASTM D792 | 1.23 g/cm³ |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Shore hardness | ShoreA,10Sec | ASTM D2240 | 56 |
| aging | Điều kiện kiểm tra | Phương pháp kiểm tra | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | ShoreA,125°C,168hr | ASTM D573 | 12 |
| Change rate of ultimate elongation in air | 125°C,168hr | ASTM D573 | 31 % |
| Change rate of tensile strength in air | 125°C,168hr | ASTM D573 | 56 % |
