So sánh vật liệu
Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC EXL1132T NA8A005T SABIC INNOVATIVE NANSHA
LEXAN™
Thiết bị gia dụng,Lĩnh vực ô tô,Lĩnh vực điện tử,Lĩnh vực điện
Chịu nhiệt độ thấp,Dễ dàng xử lý,Dòng chảy cao,Chống tia cực tím
UL
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Thông số kỹ thuật
| optical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| transmissivity | 2540 μm | ASTM D1003 | 82.0 % |
| turbidity | 2540 μm | ASTM D1003 | 3.0 % |
| impact performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 无断裂 |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 20 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 55 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 无断裂 |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 65 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 69.6 J |
| 23°C, Total Energy | ASTM D3763 | 74.0 J | |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 45 kJ/m² |
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 0.8 mm | IEC 60695-2-13 | 850 °C |
| Extreme Oxygen Index | ISO 4589-2 | 32 % | |
| Hot filament ignition temperature | 3.0 mm | IEC 60695-2-13 | 850 °C |
| 3.0mm | IEC 60695-2-13 | 875 °C | |
| 1.0mm | IEC 60695-2-13 | 875 °C | |
| Burning wire flammability index | 3.0 mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5 mm | UL 94 | HB |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 850 °C |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| elongation | Yield | ISO 527-2/50 | 5.4 % |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 95.1 Mpa |
| Tensile modulus | ASTM D638 | 2280 Mpa | |
| --2 | ASTM D638 | 2260 Mpa | |
| Bending modulus | --5 | ISO 178 | 2140 Mpa |
| Tensile strain | Break | ISO 527-2/50 | 100 % |
| Tensile modulus | -- | ISO 527-2/1 | 2340 Mpa |
| bending strength | ISO 178 | 85.0 Mpa | |
| elongation | Break | ASTM D638 | 110 % |
| Bending modulus | 50.0mmSpan | ASTM D790 | 2320 Mpa |
| bending strength | --5,6 | ISO 178 | 89.0 Mpa |
| tensile strength | Break | ASTM D638 | 58.7 Mpa |
| elongation | Break3 | ASTM D638 | 120 % |
| Yield | ASTM D638 | 5.8 % | |
| Tensile strain | Yield | ISO 527-2/50 | 5.0 % |
| tensile strength | Yield | ASTM D638 | 58.1 Mpa |
| elongation | Yield3 | ASTM D638 | 5.7 % |
| tensile strength | Yield | ISO 527-2/50 | 57.0 Mpa |
| Break | ISO 527-2/50 | 56.0 Mpa | |
| Tensile modulus | ISO 527-2/1 | 2150 Mpa | |
| bending strength | Yield, 50.0 mm Span4 | ASTM D790 | 94.0 Mpa |
| tensile strength | Break3 | ASTM D638 | 57.0 Mpa |
| Bending modulus | 50.0 mm Span4 | ASTM D790 | 2240 Mpa |
| ISO 178 | 2240 Mpa | ||
| tensile strength | Yield3 | ASTM D638 | 58.0 Mpa |
| elongation | Break | ISO 527-2/50 | 120 % |
| injection | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Suggested maximum moisture content | 0.020 % | ||
| Mold temperature | 70 to 95 °C | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| Suggested injection volume | 40 to 60 % | ||
| drying temperature | 120 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Screw speed | 40 to 70 rpm | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Temperature at the rear of the barrel | 270 to 295 °C | ||
| Exhaust hole depth | 0.025 to 0.076 mm | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Spray nozzle temperature | 290 to 310 °C |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| RTI Elec | UL 746 | 130 °C | |
| Hot deformation temperature | 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 121 °C |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 124 °C | |
| Vicat softening temperature | -- | ISO 306/B120 | 139 °C |
| -- | ISO 306/B50 | 144 °C | |
| -- | ASTM D152510 | 138 °C | |
| Hot deformation temperature | 0.45MPa,Annealed | ISO 75-2/Be | 136 °C |
| RTI | UL 746 | 130 °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,3.20mm | ASTM D648 | 137 °C |
| Ball Pressure Test | 125°C | IEC 60695-10-2 | Pass |
| Linear coefficient of thermal expansion | Across Flow : 23 to 80°C | ISO 11359-2 | 7.6E-5 cm/cm/°C |
| Flow : -40 to 95°C | ASTM E831 | 7.5E-5 cm/cm/°C | |
| MD：-40to40°C | ASTME831 | 7.2E-05 cm/cm/°C | |
| Vicat softening temperature | ASTM D152511 | 144 °C | |
| RTI Str | UL 746 | 125 °C | |
| Linear coefficient of thermal expansion | TD：-40to40°C | ASTME831 | 7.6E-05 cm/cm/°C |
| TD：23to80°C | ISO 11359-2 | 7.5E-05 cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed,100mmSpan | ISO 75-2/Ae | 125 °C |
| RTI Imp | UL 746 | 120 °C | |
| Hot deformation temperature | 1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span9 | ISO 75-2/Af | 116 °C |
| Ball Pressure Test | 123 to 127°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | MD：23to80°C | ISO 11359-2 | 7.5E-05 cm/cm/°C |
| Across Flow : -40 to 95°C | ASTM E831 | 7.6E-5 cm/cm/°C | |
| Flow : 23 to 80°C | ISO 11359-2 | 7.5E-5 cm/cm/°C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.15 % |
| Shrinkage rate | TD：3.20mm | Internal Method | 0.40-0.80 % |
| melt mass-flow rate | 300°C/1.2 kg | ASTM D1238 | 20 g/10 min |
| Shrinkage rate | MD：3.20mm | Internal Method | 0.40-0.80 % |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.35 % |
| Shrinkage rate | Across FlowFlow : 3.20 mm | Internal Method | 0.40 - 0.80 % |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 17 g/10min |
| Shrinkage rate | Flow : 3.20 mm | Internal Method | 0.40 - 0.80 % |
| Melt Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 19.0 cm3/10min |
| Water absorption rate | Saturation, 23°C | ISO 62 | 0.12 % |
| Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 16.0 cm3/10min |
| Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 0.090 % |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Volume resistivity | ASTM D257 | > 1.0E+15 ohms·cm | |
| Surface resistivity | ASTM D257 | > 1.0E+15 ohms |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | SABIC INNOVATIVE NANSHA/EXL1132T NA8A005T |
|---|---|---|---|
| Ball Pressure Test | H358/30 | ISO 2039-1 | 95.0 Mpa |
| Rockwell hardness | L -Sale | ISO 2039-2 | 89 |