So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PET 9L22130 FR1 4Plas
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Impact strength of cantilever beam gap-30°CISO 180/1A7.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU30 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A8.0 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA9.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU45 kJ/m²
Charpy Notched Impact Strength-30°CISO 179/1eA8.0 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Hot filament ignition temperature2.0mmIEC 60695-2-13960 °C
UL flame retardant rating3.2mmUL 94V-0
1.6mmUL 94V-0
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Tensile strainBreak,23°CISO 527-2/52.0 %
Tensile modulus23°CISO 527-2/510500 MPa
tensile strengthBreak,23°CISO 527-2/5130 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B235 °C
Vicat softening temperatureISO 306/B215 °C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A210 °C
Melting temperatureISO 11357250 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Shrinkage rateTD0.90 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.17 %
water contentISO 960<1000 ppm
densityISO 11831.68 g/cm³
Shrinkage rateMD0.20 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm tra4Plas/ 9L22130 FR1
Volume resistivityIEC 600931E+15 ohms·cm
Surface resistivityIEC 600931E+14 ohms