So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PS STYRON A-TECH™ 1115 Trinseo
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
Impact strength of cantilever beam gap23°C,InjectionASTM D256210 J/m
23°C,Compression MoldedASTM D25695 J/m
flammabilityĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
UL flame retardant ratingUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
Bending modulusInjectionASTM D7901900 MPa
bending strengthInjectionASTM D79036.0 MPa
tensile strengthInjectionASTM D63827.0 MPa
Tensile modulusInjectionASTM D6381800 MPa
tensile strengthBreak,InjectionASTM D63819.0 MPa
elongationBreak,InjectionASTM D63850 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
Hot deformation temperature1.8MPa,UnannealedASTM D64878.0 °C
Linear coefficient of thermal expansionMDASTM D6969E-05 cm/cm/°C
Vicat softening temperatureASTM D1525101 °C
Hot deformation temperature0.45MPa,UnannealedASTM D64888.0 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
Shrinkage rateMDASTM D9550.40to0.80 %
melt mass-flow rate200°C/5.0kgASTM D12382.8 g/10min
densityASTM D7921.04 g/cm³
hardnessĐiều kiện kiểm traPhương pháp kiểm traTrinseo/STYRON A-TECH™ 1115
Rockwell hardnessR-ScaleASTM D785103