So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

Polyester Hytrel® 5555HS DUPONT USA

--

--

--

- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
Impact strength of cantilever beam gap23°CISO 8256/1300 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eUNoBreak
flammabilityĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
UL flame retardant rating3.0mmIEC 60695-11-10,-20HB
Extreme Oxygen IndexISO 4589-220 %
Fogging-G-valuecondensate)3ISO 64521E-04 g
UL flame retardant rating3.0mmUL 94HB
1.5mmIEC 60695-11-10,-20HB
FMVSS flammabilityFMVSS302SE
UL flame retardant rating1.5mmUL 94HB
elastomerĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
tear strength横向FlowISO 34-1120 kN/m
FlowISO 34-1130 kN/m
Permanent compression deformation70°CISO 81560 %
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
tensile strengthYieldISO 527-215.0 MPa
Nominal tensile fracture strainISO 527-2640 %
tensile strength50%StrainISO 527-214.7 MPa
Bending modulusISO 178195 MPa
Wear resistanceISO 4649120 mm³
Tensile creep modulus1000hrISO 899-1100 MPa
tensile strengthBreakISO 527-235.0 MPa
Tensile creep modulus1hrISO 899-1140 MPa
tensile strength5.0%StrainISO 527-26.90 MPa
Tensile strainYieldISO 527-236 %
BreakISO 527-2>300 %
Tensile modulusISO 527-2190 MPa
tensile strength100%StrainISO 527-216.0 MPa
10%StrainISO 527-211.1 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B78.0 °C
Melting temperatureISO 11357-3201 °C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A51.0 °C
Vicat softening temperature--ISO 306/B5075.0 °C
Linear coefficient of thermal expansionTDISO 11359-21.8E-04 cm/cm/°C
Brittle temperatureISO 974-80.0 °C
Effective thermal diffusivity coefficient5.44E-08 m²/s
Linear coefficient of thermal expansionMDISO 11359-21.8E-04 cm/cm/°C
Vicat softening temperature--ISO 306/A50177 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
Shrinkage rateMDISO 294-41.5 %
Melt Volume Flow Rate (MVR)220°C/2.16kgISO 11338.50 cm³/10min
densityISO 11831.19 g/cm³
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 620.20 %
melt mass-flow rate220°C/2.16kgISO 11338.5 g/10min
Shrinkage rateTDISO 294-41.5 %
Water absorption rate23°C,24hrISO 620.70 %
Saturation,23°C,2.00mmISO 620.60 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
Compared to the anti leakage trace indexIEC 60112PLC 0
hardnessĐiều kiện kiểm traPhương pháp kiểm traDUPONT USA/Hytrel® 5555HS
Shore hardnessShoreDISO 86855
ShoreD,15SecISO 86852