So sánh vật liệu
Thông số kỹ thuật
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | BASF GERMANY/Elastollan® S90AN |
|---|---|---|---|
| Permanent compression deformation | 23°C,22hr | ASTM D395B | 25 % |
| tensile strength | ASTM D412 | 42.7 MPa | |
| 300%Strain | ASTM D412 | 26.9 MPa | |
| Permanent compression deformation | 70°C,22hr | ASTM D395B | 45 % |
| tensile strength | 100%Strain | ASTM D412 | 12.4 MPa |
| elongation | Break | ASTM D412 | 540 % |
| tear strength | ASTM D624 | 145 kN/m |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | BASF GERMANY/Elastollan® S90AN |
|---|---|---|---|
| Bending modulus | Injection | ASTM D790 | 45.5 MPa |
| Wear resistance | DIN 53516 | 30 mm³ | |
| Tensile modulus | Injection | ASTM D412 | 45.5 MPa |
| Taber abraser | ASTM D1044 | 25.0 mg |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | BASF GERMANY/Elastollan® S90AN |
|---|---|---|---|
| Glass transition temperature | Internal Method | -31.0 °C | |
| Vicat softening temperature | ASTM D1525 | 130 °C | |
| Internal Method | 118 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | BASF GERMANY/Elastollan® S90AN |
|---|---|---|---|
| density | ASTM D792 | 1.23 g/cm³ |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | BASF GERMANY/Elastollan® S90AN |
|---|---|---|---|
| Shore hardness | ShoreA | ASTM D2240 | 90 |
