So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
AS(SAN) 388S INEOS STYRO THAILAND
Luran® 
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

Other performanceĐiều kiện kiểm traPhương pháp kiểm traINEOS STYRO THAILAND/388S
Extreme Oxygen Index18 %
Basic PerformanceĐiều kiện kiểm traPhương pháp kiểm traINEOS STYRO THAILAND/388S
melt mass-flow rate220℃/10kg7 CM
density1080 kg/m
Water absorption rate0.3 %
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traINEOS STYRO THAILAND/388S
Charpy Notched Impact Strength23℃21 KJ/m
Tensile modulus1h3500 Mpa
3900 Mpa
tensile strengthBreak84 Mpa
Tensile modulus1000h2800 Mpa
Charpy Notched Impact Strength-30℃19 KJ/m
Tensile fracture elongation4 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traINEOS STYRO THAILAND/388S
Hot deformation temperature0.45MPa103 °C
1.80MPa99 °C
Combustibility1.6mmUL 94HB
Linear coefficient of thermal expansionFlow0.7 E-4/℃
Vicat softening temperature50℃/H50n107 °C
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traINEOS STYRO THAILAND/388S
Dissipation factor100Hz50 E-4
Volume resistivity>1E13 Ω.m
Dielectric constant1MHz2.8
Dissipation factor1MHz80 E-4
Dielectric strength34 KV/mm
Compared to the Leakage Traceability Index (CTI)475
Dielectric constant100Hz3
Surface resistivity>1E15 Ω