So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
product

Polyester, TS UP 804 Hexion Inc.

--

--

--

- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Charpy Notched Impact Strength23°CISO 179/1eA4.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU7.0 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
UL flame retardant rating1.4mmUL 94V-0
1.5mmUL 94V-0
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
bending strengthISO 178105 MPa
Bending modulusISO 17815000 MPa
Compressive stressISO 604250 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Hot deformation temperature8.0MPa,UnannealedISO 75-2/C205 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Apparent densityISO 600.92 g/cm³
Shrinkage rateISO 25770.010 %
density23°CISO 11832.10 g/cm³
Water absorption rateISO 6213.0 mg
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Dielectric strength1.00mmIEC 60243-128 kV/mm
Volume resistivityIEC 600931E+13 ohms·cm
Relative permittivity100HzIEC 602505.50
Dissipation factor100HzIEC 602500.010
Surface resistivityIEC 600931E+12 ohms
Compared to the anti leakage trace indexSolutionAIEC 60112PLC 0
hardnessĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Ball Pressure TestH961/30ISO 2039-1425 MPa
Supplementary InformationĐiều kiện kiểm traPhương pháp kiểm traHexion Inc./UP 804
Compression molding pressure>15.0 MPa
Compression molding temperature160to190 °C