So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC+ABS PC-ABSCOM™ B1000 Polymer Compounders Limited
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B1000
Impact strength of cantilever beam gap23°CISO 180/1A45 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA50 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Charpy Notched Impact Strength-30°CISO 179/1eA15 kJ/m²
flammabilityĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B1000
UL flame retardant rating3.2mmUL 94V-0
1.5mmUL 94V-0
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B1000
bending strengthISO 17890.0 MPa
Tensile strainBreakISO 527-260 %
tensile strengthYieldISO 527-2/5045.0 MPa
Tensile modulusISO 527-2/12700 MPa
Tensile strainYieldISO 527-2/504.1 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B1000
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae90.0 °C
Vicat softening temperatureISO 306/B50112 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/Be103 °C
Linear coefficient of thermal expansionMDISO 11359-28E-05 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B1000
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
Shrinkage rateISO 294-40.40to0.70 %
densityISO 11831.18 g/cm³
melt mass-flow rate220°C/5.0kgISO 113328 g/10min
Water absorption rateSaturation,23°CISO 620.60 %