So sánh vật liệu
Thông số kỹ thuật
| Cured Properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| Volume resistivity | 23°C | >3.0E+12 ohms·cm | |
| Relative permittivity | 1kHz | 2.62 | |
| Dissipation factor | 1kHz | 3.2E-03 | |
| LapShearStrength | 23°C | >13.8 MPa | |
| Shore hardness | ShoreD | 88 |
| Uncured Properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| density | PartA | 1.20 g/cm³ | |
| Pot Life | 1400 min | ||
| Color | --6 | Clear/Transparent | |
| --7 | Yellow | ||
| density | 粘度8(23°C) | 3.5to5.0 Pa·s | |
| 固化时间(150°C) | 1.0 hr | ||
| PartB | 1.09 g/cm³ |
| optical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| transmissivity | 820to1620nm | >94.0 % | |
| Refractive index | 1.570 | ||
| transmissivity | 640to800nm | >90.0 % |
| thermosetting | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| Thermosetting components | PartA | 按重量计算的混合比:10 | |
| PartB | 按重量计算的混合比:1.0 | ||
| Shelf Life(23°C) | 52 wk |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| Glass transition temperature | >100 °C | ||
| Linear coefficient of thermal expansion | MD:--3 | 3.1E-05 cm/cm/°C | |
| MD:--4 | 1.3E-04 cm/cm/°C |
| Supplementary Information | Điều kiện kiểm tra | Phương pháp kiểm tra | Epoxy Technology Inc./323LP |
|---|---|---|---|
| operate temperature | StorageModulus | 2.67 GPa | |
| weight loss on heating | 250°C | 0.46 % | |
| DegradationTemperature | 413 °C | ||
| Shear Strength | 23°C | 46.9 MPa | |
| operate temperature | Continuous | -55-200 °C | |
| weight loss on heating | 300°C | 0.85 % | |
| operate temperature | Intermittent | -55-300 °C | |
| weight loss on heating | 200°C | 0.31 % |
