So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC/PTFE DL-4020 LNP MALAYSIA
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traLNP MALAYSIA/DL-4020
Suspended wall beam without notch impact strength23°CASTM D4812无断裂
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traLNP MALAYSIA/DL-4020
tensile strengthBreakASTM D63853.0 Mpa
Wear factorASTM D37022.0E+7 10^-8 mm³/N·m
bending strengthASTM D79081.0 Mpa
Friction coefficientStaticASTM D37020.17
DynamicASTM D37020.28
Bending modulusASTM D7902270 Mpa
elongationBreakASTM D63853 %
injectionĐiều kiện kiểm traPhương pháp kiểm traLNP MALAYSIA/DL-4020
drying time4.0 hr
Screw speed30 to 60 rpm
Suggested maximum moisture content0.020 %
Temperature in the middle of the barrel305 to 315 °C
Mold temperature80 to 110 °C
Temperature at the rear of the barrel295 to 305 °C
Processing (melt) temperature300 to 315 °C
drying temperature120 °C
Temperature at the front of the material cylinder310 to 320 °C
Back pressure0.200 to 0.300 Mpa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traLNP MALAYSIA/DL-4020
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648128 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traLNP MALAYSIA/DL-4020
Shrinkage rateFlow : 24hrASTM D9550.70 - 0.90 %
Across FlowFlow : 24hrASTM D9550.70 - 0.90 %