So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PPO/PA GTX910-74701 SABIC INNOVATIVE US
NORYL GTX™ 
Ứng dụng điện,Thiết bị điện
Dòng chảy cao,Kháng hóa chất,Độ cứng cao

Giá nội địa

Miền Nam Việt Nam (xung quanh Hồ Chí Minh)

₫ 125.060/KG

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
Dart impact-30°C, Energy at PeakASTM D376339.0 J
23°C, Energy at PeakASTM D376350.0 J
flammabilityĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
UL flame retardant rating1.5 mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
tensile strengthYieldASTM D63859.0 Mpa
BreakASTM D63855.0 Mpa
Bending modulus100 mm SpanASTM D7902240 Mpa
bending strengthYield, 100 mm SpanASTM D79095.0 Mpa
elongationBreakASTM D63860 %
injectionĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
Suggested maximum moisture content0.070 %
Mold temperature75 to 120 °C
Processing (melt) temperature280 to 305 °C
drying temperature95 to 105 °C
Suggested injection volume30 to 50 %
drying time3.0 to 4.0 hr
Screw speed20 to 100 rpm
Temperature in the middle of the barrel270 to 305 °C
Temperature at the rear of the barrel265 to 305 °C
Exhaust hole depth0.013 to 0.038 mm
Temperature at the front of the material cylinder275 to 305 °C
Back pressure0.300 to 1.40 Mpa
Spray nozzle temperature280 to 305 °C
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
RTI ElecUL 74650.0 °C
Linear coefficient of thermal expansionFlow : 60 to 138°CASTM E8311.3E-4 cm/cm/°C
Vicat softening temperatureASTM D15254232 °C
Linear coefficient of thermal expansionAcross Flow : 60 to 138°CASTM E8311.3E-4 cm/cm/°C
RTI ImpUL 74650.0 °C
Hot deformation temperature0.45 MPa, Unannealed, 6.40 mmASTM D648193 °C
RTIUL 74650.0 °C
Linear coefficient of thermal expansionAcross Flow : -40 to 95°CASTM E8319.0E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mmASTM D648143 °C
Linear coefficient of thermal expansionFlow : -40 to 95°CASTM E8319.0E-5 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
Water absorption rate24 hr, 50% RHASTM D5700.50 %
Equilibrium, 50% RHASTM D5701.0 %
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method1.0 - 1.2 %
Flow : 3.20 mmInternal Method1.1 - 1.3 %
Flow : 130°C, 1hrASTM D9551.6 - 1.8 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
Hot wire ignitionUL 746PLC 3
Arc resistanceASTM D495PLC 7
High voltage arc tracing rateUL 746PLC 4
Compared to the anti leakage trace indexUL 746PLC 1
High arc combustion indexUL 746PLC 0
hardnessĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE US/GTX910-74701
Rockwell hardnessR-ScaleASTM D785116