So sánh vật liệu
Thông số kỹ thuật
| flammability | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| mechanical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 78.5 Mpa |
| bending strength | Yield | ASTM D790 | 108 Mpa |
| Bending modulus | ASTM D790 | 3330 Mpa | |
| elongation | Break | ASTM D638 | 4.0 % |
| thermal performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 144 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 4.3E-05 cm/cm/°C |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 155 °C |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30-0.50 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.13 % |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 10 g/10min |
| Electrical performance | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4E+16 ohms·cm | |
| Arc resistance | ASTM D495 | 120 sec | |
| Dielectric constant | ASTM D150 | 2.97 | |
| Dissipation factor | ASTM D150 | 9.6E-03 | |
| Dielectric strength | ASTM D149 | 31 KV/mm |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | SAMYANG KOREA/3025GN10 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 121 |
