So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC PC-ABSCOM™ B300 Polymer Compounders Limited
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B300
Impact strength of cantilever beam gap23°CISO 180/1A48 kJ/m²
Charpy Notched Impact Strength23°CISO 17947 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
flammabilityĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B300
UL flame retardant rating1.5mmUL 94HB
0.8mmUL 94HB
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B300
Bending modulus23°CISO 1782200 MPa
bending strengthISO 17866.0 MPa
Tensile strainYield,-20°CISO 527-26.3 %
BreakISO 527-235 %
tensile strengthYield,80°CISO 527-220.0 MPa
YieldISO 527-2/5050.0 MPa
Tensile modulusISO 527-2/12100 MPa
tensile strengthYield,-40°CISO 527-263.0 MPa
Tensile strainYieldISO 527-2/504.3 %
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B300
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae110 °C
0.45MPa,UnannealedISO 75-2/B131 °C
Vicat softening temperatureISO 306/B50130 °C
Linear coefficient of thermal expansionMDISO 11359-29.5E-04 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traPolymer Compounders Limited/PC-ABSCOM™ B300
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
melt mass-flow rate260°C/5.0kgISO 113318 g/10min
Shrinkage rateISO 294-40.40to0.70 %
densityISO 11831.15 g/cm³
Water absorption rateSaturation,23°CISO 620.70 %