So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC+ABS LUBEMIX 45 BLACK LUBEN PLAST srl
--
--
--
- -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 45 BLACK
Impact strength of cantilever beam gap23°C4ASTM D25635to40 kJ/m²
23°CISO 180/A30to35 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA30to35 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Impact strength of cantilever beam gap23°C,3.20mmASTM D256A350to400 J/m
Suspended wall beam without notch impact strength23°CISO 180无断裂
Impact strength of cantilever beam gap23°C3ASTM D256无断裂
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 45 BLACK
Tensile strainBreakISO 527-2/1A/5035to45 %
bending strengthISO 17845.0to55.0 MPa
Tensile strainYieldISO 527-2/1A/505.0-6.0 %
tensile strengthBreakISO 527-2/1A/5035.0to40.0 MPa
Tensile modulusISO 527-2/1A/11800to2300 MPa
tensile strengthYieldISO 527-2/1A/5040.0to45.0 MPa
Bending modulusISO 1781500to2000 MPa
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 45 BLACK
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B105to115 °C
Vicat softening temperature--ISO 306/B120100to110 °C
Hot deformation temperature1.8MPa,Unannealed,3.20mmASTM D64895.0to105 °C
Vicat softening temperature--ISO 306/A120110to120 °C
Hot deformation temperature0.45MPa,Unannealed,3.20mmASTM D648100to110 °C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traLUBEN PLAST srl/LUBEMIX 45 BLACK
melt mass-flow rate260°C/5.0kgISO 113315to20 g/10min
densityISO 1183/A1.08to1.12 g/cm³