Tìm kiếm sản phẩm

So sánh vật liệu

Thông tin sản phẩm
Tên sản phẩm
Tên thương hiệu
Lĩnh vực ứng dụng
Đặc tính
Giấy chứng nhận
Đơn giá
PC EXL1414-GY7D493 SABIC INNOVATIVE KOREA
LEXAN™ 
phổ quát,Lĩnh vực điện,Lĩnh vực điện tử
Dễ dàng xử lý,Thanh khoản trung bình,Độ dẻo,Đồng trùng hợp,Hiệu suất phát hành tốt

Giá nội địa

Miền Nam Việt Nam (xung quanh Hồ Chí Minh)

₫ 104.780/KG

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Thông số kỹ thuật

impact performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
Impact strength of cantilever beam gap23°C8ISO 180/1A70 kJ/m²
-30°C8ISO 180/1A60 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Charpy Notched Impact Strength23°CISO 179/1eA70 kJ/m²
Impact strength of cantilever beam gap23°CASTM D256870 J/m
Dart impact23°C, Total EnergyASTM D376370.0 J
Charpy Notched Impact Strength-30°CISO 179/1eA65 kJ/m²
Impact strength of cantilever beam gap-30°CASTM D256770 J/m
flammabilityĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
Hot filament ignition temperature3.0 mmIEC 60695-2-13875 °C
Burning wire flammability index0.8 mmIEC 60695-2-12850 °C
UL flame retardant rating0.40 mmUL 94HB
Hot filament ignition temperature1.0 mmIEC 60695-2-13875 °C
Burning wire flammability index1.0 mmIEC 60695-2-12960 °C
mechanical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
elongationYieldISO 527-2/506.0 %
Bending modulus--5ISO 1782250 Mpa
elongationYield3ASTM D6386.0 %
Tensile modulus--2ASTM D6382020 Mpa
tensile strengthYieldISO 527-2/5057.0 Mpa
BreakISO 527-2/5060.0 Mpa
Tensile modulus--ISO 527-2/12150 Mpa
bending strengthYield, 50.0 mm Span4ASTM D79092.0 Mpa
Bending modulus50.0 mm Span4ASTM D7902230 Mpa
tensile strengthBreak3ASTM D63850.0 Mpa
bending strength--5,6ISO 17885.0 Mpa
elongationBreak3ASTM D63898 %
tensile strengthYield3ASTM D63855.0 Mpa
elongationBreakISO 527-2/50120 %
injectionĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
Suggested maximum moisture content0.020 %
Mold temperature70 to 95 °C
Processing (melt) temperature295 to 315 °C
Suggested injection volume40 to 60 %
drying temperature120 °C
drying time3.0 to 4.0 hr
Screw speed40 to 70 rpm
Temperature in the middle of the barrel280 to 305 °C
Temperature at the rear of the barrel270 to 295 °C
Exhaust hole depth0.025 to 0.076 mm
Temperature at the front of the material cylinder295 to 315 °C
Back pressure0.300 to 0.700 Mpa
Spray nozzle temperature290 to 310 °C
thermal performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
RTI ElecUL 746130 °C
Hot deformation temperature0.45 MPa, Unannealed, 3.20 mmASTM D648139 °C
1.8 MPa, Unannealed, 3.20 mmASTM D648124 °C
Vicat softening temperature--ISO 306/B120146 °C
Hot deformation temperature0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Be140 °C
Vicat softening temperature--ASTM D152510145 °C
RTIUL 746125 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 80°CISO 11359-27.2E-5 cm/cm/°C
Flow : -40 to 40°CASTM E8317.0E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Ae128 °C
RTI ImpUL 746120 °C
Ball Pressure Test123 to 127°CIEC 60695-10-2通过
Linear coefficient of thermal expansionAcross Flow : -40 to 40°CASTM E8317.5E-5 cm/cm/°C
Flow : 23 to 80°CISO 11359-27.2E-5 cm/cm/°C
Physical propertiesĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
melt mass-flow rate300°C/1.2 kgASTM D123810 g/10 min
density--ISO 11831.19 g/cm³
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method0.40 - 0.80 %
Flow : 3.20 mmInternal Method0.40 - 0.80 %
Water absorption rateSaturation, 23°CISO 620.35 %
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 11339.00 cm3/10min
density--ASTM D7921.18 g/cm³
Water absorption rateEquilibrium, 23°C, 50% RHISO 620.15 %
Electrical performanceĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
Dissipation factor1 MHzASTM D1509.3E-3
Volume resistivityASTM D257> 1.0E+15 ohms·cm
Dielectric constant1 MHzASTM D1502.64
Surface resistivityASTM D257> 1.0E+15 ohms
Dielectric constant100 HzASTM D1502.68
Dissipation factor100 HzASTM D1501.2E-3
Dielectric strength0.800 mm, in OilASTM D14916 KV/mm
hardnessĐiều kiện kiểm traPhương pháp kiểm traSABIC INNOVATIVE KOREA/EXL1414-GY7D493
Rockwell hardnessL -SaleASTM D78589
R-ScaleASTM D785121