So sánh vật liệu
Thông số kỹ thuật
| elastomer | Điều kiện kiểm tra | Phương pháp kiểm tra | Kraton Polymers LLC/KRATON® G1750 M |
|---|---|---|---|
| elongation | Break | ASTM D412 | 100 % |
| tensile strength | Yield | ASTM D412 | <0.345 MPa |
| Physical properties | Điều kiện kiểm tra | Phương pháp kiểm tra | Kraton Polymers LLC/KRATON® G1750 M |
|---|---|---|---|
| Antioxidants | Internal Method | 0.030to0.20 % | |
| viscosity | 100°C | Internal Method | 11.8to14.1 cSt |
| Volatile compounds | Internal Method | <1.0 % | |
| density | ASTM D4025 | 0.860 g/cm³ | |
| melt mass-flow rate | 200°C/5.0kg | Internal Method | 8.0 g/10min |
| hardness | Điều kiện kiểm tra | Phương pháp kiểm tra | Kraton Polymers LLC/KRATON® G1750 M |
|---|---|---|---|
| Shore hardness | ShoreA,30Sec | Internal Method | 11 |
| Supplementary Information | Điều kiện kiểm tra | Phương pháp kiểm tra | Kraton Polymers LLC/KRATON® G1750 M |
|---|---|---|---|
| Styrene/rubber ratio | Internal Method | 0/100 % |
